Canīt do a printf of a string, but can single chars !!

Started by andres477 in LPC200012 years ago 7 replies

Hello everyone, I?m new at this forum. I come from PIC?s world, under a very different 'C' world, too. The problem is this: ...

Hello everyone, I?m new at this forum. I come from PIC?s world, under a very different 'C' world, too. The problem is this: I?m receiving a string over RS232, and "accumulate" chars using an irq based routine. I check how I?m receiving every character using ULINK, and they come in OK. I can print every SINGLE char over RS232, but when I want to do a printf of the whole ...


does IAR can work with N-Link ARM USB JTAG?

Started by naderus2000 in LPC200013 years ago 1 reply

Hi, does IAR can work with N-Link ARM USB JTAG? i read it Compatible with ULINK 100% so no problem in keil but i want to know about iar. it's...

Hi, does IAR can work with N-Link ARM USB JTAG? i read it Compatible with ULINK 100% so no problem in keil but i want to know about iar. it's only $50. here is the link: http://www.micro4you.com/product_info.php? products_id=87&osCsid=96225f362c57ecd96ad921a06829a115


uVision3 error message: "Missing Device (R003....)"

Started by ottorichter100 in LPC200013 years ago 2 replies

Hi out there, I'm new to ARM-Controllers and KEIL uVision. I'm using the trial version (restricted version), with Keil tool-chain on a...

Hi out there, I'm new to ARM-Controllers and KEIL uVision. I'm using the trial version (restricted version), with Keil tool-chain on a WIN2000-PC Compiling works, also loading into LPC2103 (with ULINK). The compiler tells me that I use 12% of code limit of the trial version. BUT: When I want to start my program on the LPC2103 by the debugger I get the following message: MISSING DEVIC...


blinky flash download problem

Started by dagoss123 in LPC200014 years ago

I am new to the ARM uC and the Keil tools I have a Keil MCB2130 board with a 2138 I have the Keil ULINK connected to a USB port (and...

I am new to the ARM uC and the Keil tools I have a Keil MCB2130 board with a 2138 I have the Keil ULINK connected to a USB port (and the USB light is on) and windows recognized it as a USB device. It is connected to the eval board through the JTAG connector. A seperate USB connector powers the board and the power led is on (and i veri


MCB2100 LPC2114 starter code

Started by petermccormick1 in LPC200016 years ago 2 replies

We have used Keil Uv2 (assemblers & C) and Ceibo emulators & programmers for the 87C554 family of chips for years. The 87C is great but it is...

We have used Keil Uv2 (assemblers & C) and Ceibo emulators & programmers for the 87C554 family of chips for years. The 87C is great but it is becoming an antique. We are migrating to the LPC2114 and have purchased the Keil Ulink and MCB2100 to ramp up. Keil does not seem to have much sample code to work with the MCB2100 for starters. Are there any web sites with code, flash programmin


LPC2468 & Jtag Failure

Started by maveric_pta in LPC20009 years ago 4 replies

I have design my own custom Board. I have confirmed that all JTAG connections are correct and have confirmed my ULink-ME is working on a STM32...

I have design my own custom Board. I have confirmed that all JTAG connections are correct and have confirmed my ULink-ME is working on a STM32 development board. I am using uVision4. Using standard Blinky project from Keil. When I tried to connect to the CPU I get JTAG Communication Failure. I have confirmed that all pull up and pull down resistors are correct on JTAG .. I have assembled a ...


I can download the program to MCU (LPC2468) on Keil ULink

Started by wilnfl in LPC200012 years ago 4 replies

I use LPC2468. I has write some code to control PWM, and I set the PCON = 0x2, so the system enter power down mode, and then, I cann't...

I use LPC2468. I has write some code to control PWM, and I set the PCON = 0x2, so the system enter power down mode, and then, I cann't download any program to this chip, because every time this board power up, it enter power down mode, so I cann't connect jtag. Anybody has any method to solve this problem? Thanks in advacne.


Avnet Philips Arm Seminar

Started by Eric Engler in LPC200013 years ago 1 reply

I just went to this seminar last...

I just went to this seminar last week: http://www.em.avnet.com/evs/home/0,4582,CID%253D29838%2526CCD%253DUSA%2526SID%253DNoNav%2526DID% 253DDF2%2526LID%253D4744%2526BID%253DDF2%2526CTP%253DEVS,00.html It was very good. I strongly recommend this for anyone who's new to the Philips Arm devices. For the $99 fee, you'll also get a Keil MCB2140 board and a ULink USB JTAG debugging emulator (whi


JTAG Download problems

Started by dagoss123 in LPC200014 years ago 2 replies

I am new to the ARM uC and the Keil tools I have a Keil MCB2130 board with a 2138 I have the Keil ULINK connected to a USB port (and...

I am new to the ARM uC and the Keil tools I have a Keil MCB2130 board with a 2138 I have the Keil ULINK connected to a USB port (and the USB light is on) and windows recognized it as a USB device. It is connected to the eval board through the JTAG connector. A seperate USB connector powers the board and the power led is on (and i verifi


Seminar Keil / UML / NXP-ARM in Germany in a week, enroll now

Started by nxp_apps in LPC200013 years ago

Hi all, there is going to be a seminar tour through Germany starting April 16. There is an enrollment fee of 199 Euros that also pays for the...

Hi all, there is going to be a seminar tour through Germany starting April 16. There is an enrollment fee of 199 Euros that also pays for the MCB2130 evaluation board as well as a new ULINK 2 USB-JTAG debugger. To enroll please go here: http://www.keil.com/events/seminar.asp?ID=74&bhcp=1 Locations: * April 16, 2007: Munich * April 17, 2007: Stuttgart * April 18, 200...


External Flash Algorithms intel TE28F160C3BD70

Started by civcivonur in LPC200012 years ago 1 reply

Hi, I have a LPC2294 Development Board. http://www.olimex.com/dev/images/LPC-L2294-1MB-sch.gif i could not use the external flash. I search...

Hi, I have a LPC2294 Development Board. http://www.olimex.com/dev/images/LPC-L2294-1MB-sch.gif i could not use the external flash. I search for the code of intel TE28F160C3BD70 programming but i could not find. So i try to modify the code of RC28F320J that is writen by Keil. But when i try to load the program with this code Ulink says "Can not load Flash Programming Algorithm" & "Insuffi...


debugging USB on Keil's 2148 demo board

Started by Sutton Mehaffey in LPC200011 years ago 3 replies

Is there any good way to power the Keil board other than USB? In using their ULINK debugger to follow the USB demo code, I have to unplug the...

Is there any good way to power the Keil board other than USB? In using their ULINK debugger to follow the USB demo code, I have to unplug the USB in order to start the enumeration process again. When that happens, the debugger halts and will not start again on reset. Therefore, there is no way I can set breakpoints on certain statements watching the enumeration process. By the way,...


LPC2888 DFU-Flash Question

Started by thonguyen02 in LPC200011 years ago 3 replies

I use Keil and got the Keil's USB mass storage running. I flash the code through Ulink Jtag and now I want to update the software through the...

I use Keil and got the Keil's USB mass storage running. I flash the code through Ulink Jtag and now I want to update the software through the usb. NXP has DFU-Flash tool to download the software to flash through usb. So does anyone know how I can do like that without using DFU-Flash? I know that I should erase the flash marker 0xAA55AA55 at 0x104FF800 to make the device work as nxp usb...


JTAG Debugger Question

Started by RANGARAJAN in LPC200013 years ago 1 reply

Hi All: I have a License for Code Warrior, but have a ULINK- Keil JTAG debugger. ADS is not finding the JTAG debugger gives me a RDI...

Hi All: I have a License for Code Warrior, but have a ULINK- Keil JTAG debugger. ADS is not finding the JTAG debugger gives me a RDI Warning 00159: Could not open Specified device port. I tried to verify the driver Keil uses for the debugger, couldn;t really tell which is the driver. The issue w/ Keil is that there is 16K limit on the size of the code, since I have the ADS license I w...


LPC2148 Flash Debugging With AXD

Started by Shahzeb Ihsan in LPC200013 years ago 2 replies

Hi, I compiled a small example using ADS compilers with Keil uVision3 for LPC2148, set to be downloaded into the flash and debugged from...

Hi, I compiled a small example using ADS compilers with Keil uVision3 for LPC2148, set to be downloaded into the flash and debugged from there. The compiled *.axf image ran fine with ULINK. Also when I loaded this image into AXD, it ran fine (with OpenICE32 A900), as long as I gave it the correct path to the source files. So, I decided to take the source files and combine them into an AR...


LPC2212/4 and Altera Cyclone in same JTAG chain?

Started by wayne_s_cranwell in LPC200014 years ago 3 replies

Has anyone used a Ulink USB-JTAG adaptor from within Kiel's uVision3 IDE, to target a Philips LPC2214 that is in a JTAG chain with an ...

Has anyone used a Ulink USB-JTAG adaptor from within Kiel's uVision3 IDE, to target a Philips LPC2214 that is in a JTAG chain with an Altera FPGA, e.g. cyclone? The manual chain configuration of the IDE uVision tool allows one to enter the Altera IDCODE and IR length etc. as well as the Philips IDCODE and IR length etc. The Settings view then shows two dev


Keil and LPC 2103 problems

Started by victor serov in LPC200014 years ago 1 reply

Hi to all. I have a board from Olimex with LPC-2103. My first problem - I can't download program to the board with ULINK and JTAG. I receive...

Hi to all. I have a board from Olimex with LPC-2103. My first problem - I can't download program to the board with ULINK and JTAG. I receive the message - "Cannot load flash programming algorithm" I use algorithm "LPC2000 IAP2 32kb Flash". If I use Philips FLASH utility via RS232 all works fine. And JTAG download works correct with other ARMs (STR7). And second and bigger problem - For e...


project file of LPC214x for ADS1.2 version

Started by zeng_liwen in LPC200014 years ago

I'm looking for project file of LPC214x for ADS1.2 version I know Keil demo for LPC214x usbhid,but I have no ULINK so I can't debug it. I'm...

I'm looking for project file of LPC214x for ADS1.2 version I know Keil demo for LPC214x usbhid,but I have no ULINK so I can't debug it. I'm using ads1.2 to develop lpc213x software, now I want to develop lpc214x usb in ADS1.2 I have project file of 213x for ADS1.2 version, but I have no 214x's Yahoo! Groups Links


help: LPC2888 jtag can't connect!

Started by p13155138327 in LPC200012 years ago 5 replies

hi,all. i debug my board .First ,using LPC2880,JTAG can connect.My compiler is keil with ulink. Now i change LPC2888 ,JTAG can't...

hi,all. i debug my board .First ,using LPC2880,JTAG can connect.My compiler is keil with ulink. Now i change LPC2888 ,JTAG can't connect.When JTAG_SEL do not pull up. in KEIL ????OPTION????DEBUG????SETTINGS ????JTAG DEVICE CHIAN,IDCORE :0X1010202B,UNKONW JTAG DEVICE ,4 the same as lpc2880. BUT When JTAG_SEL pull up,JTAG enable ,in KEIL ????OPTION????DEBUG?? ??SETTINGS????J...