CCS ICD-U/S question

Started by guillaumedubos in Piclist13 years ago 10 replies

Hi Group, I've read the CCS website info about the CCS ICD-U/S programmer- debugger and I'm looking for more information or...

Hi Group, I've read the CCS website info about the CCS ICD-U/S programmer- debugger and I'm looking for more information or experience about this product. In fact I don't understand if this ICD needs or not CCS PCW to have access to the real time debug capabilities (which wou


ICD software re-download help

Started by cxiong2k in Piclist14 years ago

I have an ICD from MICROCHIP and use it with the CCS PCM software, When I complete the code and try to program the target board...

I have an ICD from MICROCHIP and use it with the CCS PCM software, When I complete the code and try to program the target board with the CCS ICD software. I have mistake upgrade the firmware to CCS ICD-s. I want to put it back to the MICROCHIP version. What should I do? Anybody he


CCS C (older version 3.245) & PIC16F887

Started by Jeff Cooper in Piclist8 years ago 3 replies

My CCS C compiler (PCM) is old enough to not have a 16f887.h include file but I was wanting to try that chip. I emailed CCS tech support...

My CCS C compiler (PCM) is old enough to not have a 16f887.h include file but I was wanting to try that chip. I emailed CCS tech support asking if they had a 16f887.h but they said "You will need a version 4 compiler to use the 887 chip." I find that hard to believe if, in fact, the PIC16F887 is a true PIC16F family part with classic PIC16F peripherals. So I have that question in to...


CCS PCM C Compiler (Older version 3.245) & PIC16F887

Started by Jeff Cooper in Piclist8 years ago

My CCS C compiler (PCM) is old enough to not have a 16f887.h include file but I was wanting to try that chip. I emailed CCS tech support asking...

My CCS C compiler (PCM) is old enough to not have a 16f887.h include file but I was wanting to try that chip. I emailed CCS tech support asking if they had a 16f887.h but they said "You will need a version 4 compiler to use the 887 chip." I find that hard to believe if, in fact, the PIC16F887 is a true PIC16F family part with classic PIC16F peripherals. So I have that question in to them. ...


BOOKS RELATED TO CCS C COMPILER

Started by AMIT KAPOOR in Piclist13 years ago 4 replies

Hello friends, I am using ccs c compiler . but i dont have any study material of this compiler ..so i wanted to know about...

Hello friends, I am using ccs c compiler . but i dont have any study material of this compiler ..so i wanted to know about some books which are related to this compiler..please guide me which books i should buy which has examples using ccs c compiler ..actua


CCS C compiler

Started by onmyownja in Piclist12 years ago

I would like to use the CCS C compiler but I would like to know where I could get the full version. I have never used it...

I would like to use the CCS C compiler but I would like to know where I could get the full version. I have never used it before but I believe it could be used with MPLAB. If anyone know have a full version please postoremail me.


c18 to ccs c conversion

Started by gc...@coastelect.com in Piclist10 years ago

Dear all I am going slightly batty trying to convert a suite of progs from Microchip C18 dialect to CCS C. Please respond to g...@coastelect.com...

Dear all I am going slightly batty trying to convert a suite of progs from Microchip C18 dialect to CCS C. Please respond to g...@coastelect.com if you have any help on this. I suspect there may be documents/PDFs/even a program that would help do this conversion. My only other option is to laboriously plod away hoping to get into the mind of the original (now departed) programmer.


ICSP Programming CCS

Started by Scott Lingerfelt in Piclist13 years ago

I currently have my hardware setup with ICSP. I use the MCLR, B6, B7 and connect B3 to ground. I am using the Epic programmer to...

I currently have my hardware setup with ICSP. I use the MCLR, B6, B7 and connect B3 to ground. I am using the Epic programmer to program my hardware at this time. Everything works fine. My question is I have just purchased the CCS compiler and an ICD-40U to use for prog


CCS Compiler

Started by Anonymous in Piclist13 years ago 5 replies

Anyone here ever use the CCS C Compiler for the PIC? I'm attempting to use the "ADXL210.C" file, and its telling me that I need to ...

Anyone here ever use the CCS C Compiler for the PIC? I'm attempting to use the "ADXL210.C" file, and its telling me that I need to have "#DEVICE" in that file... any ideas? Thanks, Shamoon


Not all HEX files created equally - XWISP fails on CCS HEX files.

Started by holopoint.rm in Piclist14 years ago 2 replies

Hey guys. I have been playing with my PICs for a few weeks now, and now I have a problem. I have a few HEX files from several ...

Hey guys. I have been playing with my PICs for a few weeks now, and now I have a problem. I have a few HEX files from several origins. One that I wrote in JAL, and one that I found on some newsgroup that were compiled with a CCS C compiler. The two HEX files have a different


CCS M I2C 16f648A & 16F877A

Started by Harrie Geerts in Piclist13 years ago

I'm using CCS M compiler. I want an interface I2C between a master 16f648A and a slave hardware I2C 16F877A. I'm...

I'm using CCS M compiler. I want an interface I2C between a master 16f648A and a slave hardware I2C 16F877A. I'm succeeded in sending commands from the 648A to the 877A. But I can't transmit data from the 877A to 648A. Does anybody have an example.


int8 and int16 to float. CCS

Started by sirtiffguy in Piclist13 years ago 1 reply

I'm wondering on the conversion between the int (8 bit) and int16 to Float in the CCS (PCW). Is there a function I have to...

I'm wondering on the conversion between the int (8 bit) and int16 to Float in the CCS (PCW). Is there a function I have to run to convert between the forms? or can i go... int8 my_int = 0x05; float my_float = 12.5E-2; my_float = my_int * my_float;


CCS vs MicroC or HitecC

Started by bacha bacha in Piclist11 years ago 5 replies

i am plannig to buy one c compiler with its hardware. whitch compiler do you recommend?...

i am plannig to buy one c compiler with its hardware. whitch compiler do you recommend? thanks... __________________________________________________


Hi....

Started by mksavuranoglu in Piclist14 years ago 1 reply

I need best book for CCS C compiler. Contact me...

I need best book for CCS C compiler. Contact me...


Please help! ..URGENT...

Started by kaps_iit in Piclist13 years ago

Hello friends, I need ur help urgently. I am new to pic micros. I have ccs c compiler .i made very simple programs but it is...

Hello friends, I need ur help urgently. I am new to pic micros. I have ccs c compiler .i made very simple programs but it is not working as expected. 1. program 1. ....PINB.2 is connected to ground always. #include <16f877.h>


Sorry to Interrupt!

Started by Anonymous in Piclist13 years ago 2 replies

I know, I know... corny subject, but relevant. I need a way to handle interrupts with CCS C Compiler and the PIC 18F458. ...

I know, I know... corny subject, but relevant. I need a way to handle interrupts with CCS C Compiler and the PIC 18F458. Basically, I'll be sending output from the PIC constantly through the serial line, but every so often, I might be getting something back, I need a way to handl


PIC 18F458 Timing

Started by Anonymous in Piclist13 years ago

I'm using an accelerometer to measure velocity. So it's VERY important that I know the time between each measurement of the ...

I'm using an accelerometer to measure velocity. So it's VERY important that I know the time between each measurement of the accelerometer. I have a 4MHz clock and I'm using CCS C compiler and my code is as follows: while( input(PIN_C2) ); // wait until low while( !in


CCP PWM

Started by Anonymous in Piclist13 years ago 12 replies

Hey now, I have the PIC18F458 and I'm using the CCS C compiler. My question is simple. I want to output a square wave at 50Hz and...

Hey now, I have the PIC18F458 and I'm using the CCS C compiler. My question is simple. I want to output a square wave at 50Hz and vary the duty cycle between 3% and 9%. Any ideas how to accomplish this? I know I should use "SETUP_TIMER", I'm just not sure how.


CCP2 not behaving

Started by Jim Shelton in Piclist13 years ago

Hello all, Im using the PIC X876 microcontroller with the CCS Compiler. Im trying to get the CCP2 module to do a CLR_ON_MATCH...

Hello all, Im using the PIC X876 microcontroller with the CCS Compiler. Im trying to get the CCP2 module to do a CLR_ON_MATCH on the CCP2 pin. Here is my setup: #use fast_io(C) #define throt_out PIN_C1 SET_TRIS_C(0b10011101); //Bit 1 is


Programming the PIC16F877

Started by knesha_williams in Piclist12 years ago 9 replies

I am trying to program the pic16f877 using C, however i need to find a free version of the ccs c compiler(full version) to...

I am trying to program the pic16f877 using C, however i need to find a free version of the ccs c compiler(full version) to dowload from the internet. Do you have any suggestion?