"Bill Knight" <billk@rosw.com> skrev i meddelandet
news:r7a4h09vv8282bir1r5kj0lfggf3nkub6m@4ax.com...
> Probably not. The AT91R40008 on the eb40a does not really have
> enough RAM to run uClinux.
>
> If I recall correctly, there might be a port of eCOS for the eb40A
> that you can play with.
>
There are people that have built memory addon boards.
Best Regards
Ulf Samuelsson
> Regards
> -Bill Knight
> theARMPatch
>
>
> On 5 Aug 2004 00:53:45 -0700, dreamguy007@hotmail.com (Jack) wrote:
>
> >Anyone knows? There is uclinux in the ed40a CD, but it is for the
> >higher atmel ARM chip. Will it work as well?
>
>
Reply by Bill Knight●August 5, 20042004-08-05
Probably not. The AT91R40008 on the eb40a does not really have
enough RAM to run uClinux.
If I recall correctly, there might be a port of eCOS for the eb40A
that you can play with.
Regards
-Bill Knight
theARMPatch
On 5 Aug 2004 00:53:45 -0700, dreamguy007@hotmail.com (Jack) wrote:
>Anyone knows? There is uclinux in the ed40a CD, but it is for the
>higher atmel ARM chip. Will it work as well?
Reply by Jack●August 5, 20042004-08-05
Anyone knows? There is uclinux in the ed40a CD, but it is for the
higher atmel ARM chip. Will it work as well?