Reply by An Schwob in the USA November 7, 20082008-11-07
On Nov 6, 5:52=A0am, "Matej755" <mate...@serd.cz> wrote:
> Hi, > > my design "sample board" is connecting LPC2470 via 32 bit bus SRAM and > SDRAM memory. SRAM works very well but SDRAM does not work. I use 2 devic=
es
> WINBOND W9816G6IH, 512Kx2Banksx16bits. I need urgenly help somebody... ho=
w
> to setting EMC and init SDRAM to start works. SDRAM gets eror reading dat=
a
> after write. I thing init procedure is no right. > > Thank you.
Hi Matej, there is a group for LPC2000 and you might want to check this thread http://tech.groups.yahoo.com/group/lpc2000/message/35981 An Schwob
Reply by Matej755 November 6, 20082008-11-06
Hi,

my design "sample board" is connecting LPC2470 via 32 bit bus SRAM and
SDRAM memory. SRAM works very well but SDRAM does not work. I use 2 devices
WINBOND W9816G6IH, 512Kx2Banksx16bits. I need urgenly help somebody... how
to setting EMC and init SDRAM to start works. SDRAM gets eror reading data
after write. I thing init procedure is no right.

Thank you.