Thanks so much. I created a folder called "Project Stationery" and
that did not work. "Stationery" did the trick. Metrowerks should
update their help files because they are incorrect.
Thanks again,
Eric
--- In 68HC12@68HC..., "Erich Styger" <erich.styger@f...>
wrote: > Hi Eric,
> Place your proeject/files it into the folder called 'Stationery'
inside your > installation. E.g. C:\program
> files\metrowerks\cw12_v3_1\Stationery\HC12\MyStationery
> Where
> C:\program files\metrowerks\cw12_v3_1\
> Is where you have CodeWarrior installed.
> Of course you need a .mcp file in it.
>
> Erich
>
> > -----Original Message-----
> > From: eric_cina [mailto:ecina@l...]
> > Sent: Donnerstag, 7. April 2005 19:50
> > To: 68HC12@68HC...
> > Subject: [68HC12] HC12 Stationery in CodeWarrior
> >
> >
> >
> >
> > Hi folks,
> >
> > I'm new to the HC12 and CodeWarrior. I'm trying to create a
project > > stationery for my A128 board but CodeWarrior
does not have a "Project > > Stationery" directory for me to save it
in (as they specify in the > > Help Files). How can I get CodeWarrior to
recognize my
> > stationery? Has
> > anybody else experienced this? Is this a limitation on the evaluation > > version of CodeWarrior I'm using right
now?
> >
> > Thanks,
> > Eric
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
Reply by Erich Styger●April 7, 20052005-04-07
Hi Eric,
Place your proeject/files it into the folder called 'Stationery'
inside your
installation. E.g. C:\program
files\metrowerks\cw12_v3_1\Stationery\HC12\MyStationery
Where
C:\program files\metrowerks\cw12_v3_1\
Is where you have CodeWarrior installed.
Of course you need a .mcp file in it.
Erich
> -----Original Message-----
> From: eric_cina [mailto:ecina@ecin...]
> Sent: Donnerstag, 7. April 2005 19:50
> To: 68HC12@68HC...
> Subject: [68HC12] HC12 Stationery in CodeWarrior
>
>
> Hi folks,
>
> I'm new to the HC12 and CodeWarrior. I'm trying to create a
project
> stationery for my A128 board but CodeWarrior does not have a "Project
> Stationery" directory for me to save it in (as they specify in the
> Help Files). How can I get CodeWarrior to recognize my
> stationery? Has
> anybody else experienced this? Is this a limitation on the evaluation
> version of CodeWarrior I'm using right now?
>
> Thanks,
> Eric
>
>
> Yahoo! Groups Links
Reply by eric_cina●April 7, 20052005-04-07
Hi folks,
I'm new to the HC12 and CodeWarrior. I'm trying to create a project
stationery for my A128 board but CodeWarrior does not have a "Project
Stationery" directory for me to save it in (as they specify in the
Help Files). How can I get CodeWarrior to recognize my stationery? Has
anybody else experienced this? Is this a limitation on the evaluation
version of CodeWarrior I'm using right now?