I second ngspice - I just used it a few days ago and it
worked fairly well, at least for a few simple mosfet
simulations.
--
% Randy Yates % "With time with what you've learned,
%% Fuquay-Varina, NC % they'll kiss the ground you walk
%%% 919-577-9882 % upon."
%%%% <yates@ieee.org> % '21st Century Man', *Time*, ELO
http://www.digitalsignallabs.com
Reply by Raoul Fleckman●November 13, 20082008-11-13
On 2008-11-13, problems@gmail <problems@gmail> wrote:
> Please advise what/where I may test Spice under linux.
>
>== TIA.
>
>
It's unlikely to be as mature as the packages suggested by the other
(wiser) posters, but i've found Gnucap :
http://www.gnu.org/software/gnucap/
to be very usable and sufficient for my relatively modest
(analog/filter) needs.
--
r
Reply by ●November 13, 20082008-11-13
problems@gmail writes:
> Please advise what/where I may test Spice under linux.
On Thu, 13 Nov 2008 04:33:39 -0600, problems wrote:
> Please advise what/where I may test Spice under linux.
>
> == TIA.
Do you mean SPICE the circuit simulator?
Do you _really_ mean something that's GPL, or do you mean something that
you can get for free-as-in-beer?
If you just want to simulate circuits on a Linux box, try LTSpice from
Linear Technology, running under Wine. It's a vastly improved SPICE
engine, you can get an executable for free, and AFAIK it works under Wine
(I dunno -- I don't use it on any of my Linux boxes).
--
Tim Wescott
Control systems and communications consulting
http://www.wescottdesign.com
Need to learn how to apply control theory in your embedded system?
"Applied Control Theory for Embedded Systems" by Tim Wescott
Elsevier/Newnes, http://www.wescottdesign.com/actfes/actfes.html
Reply by ●November 13, 20082008-11-13
Please advise what/where I may test Spice under linux.
== TIA.