Reply by john...@gmail.com●November 30, 20082008-11-30
> > 8.2) that were included with the kit are coming along with the dev
> > board. =A0I no longer have a need for the full versions.
>
> If you installed and activated them, they expired 12 months after that
> install date, and are no longer licensed to create new designs anyway.
Hmmm...I did activate it when I received it back ~2006, but I just did
a fresh install on a new PC (requiring me to re-submit to Xilinx for a
new registration key based on the license key I received with the
kit), and it worked just fine. I was able to create a project for the
Virtex 5 LX220 (the largest part supported by ISE 8.2).
So both the EDK and the ISE software is fully functional in all
aspects, but you're saying it isn't "officially" licensed for new
designs since 12 months have passed since activating it. I suppose
that is possible (as you indicated, after 12 months I no longer
received the free ISE/EDK updates...the kit originally shipped with
ISE/EDK 7.1 or so, and I received the 8.1 and 8.2 updates over the
course of the next 12 months after receiving the kit). I'm not an
expert on Xilinx software policy...the best I can tell you is that it
is still fully functional (and that Xilinx had no issue providing a
registration key for the license for it).
Regards,
John Orlando
www.jrobot.net
Reply by larwe●November 30, 20082008-11-30
> 8.2) that were included with the kit are coming along with the dev
> board. =A0I no longer have a need for the full versions.
If you installed and activated them, they expired 12 months after that
install date, and are no longer licensed to create new designs anyway.
Reply by john...@gmail.com●November 30, 20082008-11-30
I'm cleaning out some dev boards that have been sitting on my shelf
for too long. This ML403 embedded dev kit has been powered up once
(to test the included Linux BSP, and to blink an LED), and then put on
the shelf for a project that I never got around to. Hoping to find a
good home for it:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=270310045310
In addition, the full licenses for ISE (version 8.2) and EDK (version
8.2) that were included with the kit are coming along with the dev
board. I no longer have a need for the full versions.
Feel free to shoot me questions if you're interested.
John Orlando
www.jrobot.net