Reply by Erich Styger●September 24, 20022002-09-24
Hello,
there is no need to use any other tool to generate any kind of S-Records with
CodeWarrior
(linear, non-linear, quadratic ;-) etc).
This is supported straigt away and in automatic way with the burner/S-Record
Generator integrated in
CodeWarrior.
Check out Technical Note (TN93) which is installed together with the
documentation.
I will send it to you off-list as well.
Erich
> -----Original Message-----
> From: Ming Jiang [mailto:]
> Sent: Friday, September 20, 2002 5:19 PM
> To: <
> Subject: [68HC12] HC12 s file generation
> Hello All,
> I burned a s2 file with metrowerks tool and tried to flash program it into
the micro using P&E PROG12Z
> programmer. I realized that I need to use an app called SRecCvt from
Motorola to convert my s2 file into a linear s file
> first. Could anybody please tell me the command line that I have to enter
in order to generate a correct linear s file
> for MC9S12DP256? I followed the example from documentation and it
didn't work.
> Here is the DOS command I have entered for SRecCvt:
> SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
>
> Regards,
> Ming Jiang
>
*************************************************************************
> IMPORTANT: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by
> reply email and destroy all copies of the original message. Please
> advise immediately if you or your employer do not consent to Internet
> email for messages of this kind. Opinions, conclusions and other
> information contained in this e-mail message that do not relate to the
> official business of Life Fitness shall be understood as neither given
> nor endorsed by it.
> *************************************************************************
>
>
> --------------------
>
> ">http://docs.yahoo.com/info/terms/
Reply by Richard F. Man●September 20, 20022002-09-20
At 10:19 AM 9/20/2002 -0500, you wrote: >Hello All,
> I burned a s2 file with metrowerks tool and tried to flash
> program it into the micro using P&E PROG12Z programmer. I realized that
I
> need to use an app called SRecCvt from Motorola to convert my s2 file
> into a linear s file first. Could anybody please tell me the command line
> that I have to enter in order to generate a correct linear s file for
> MC9S12DP256? I followed the example from documentation and it didn't
work.
>Here is the DOS command I have entered for SRecCvt:
>SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
>
>Regards,
>Ming Jiang
P&E has a Windows S Record converter that may be easier to use. You can d/l
it for free at www.pemicro.com
// richard <http://www.imagecraft.com>. We had a server CRASH :-( Please
rejoin ImageCraft mailing lists
<http://www.dragonsgate.net/mailman/listinfo>
[ For technical support, please include all previous replies in your msgs. ]
Reply by Gordon Doughman●September 20, 20022002-09-20
Ming,
Send me your S-Record file off list & I'll have a look at it. Could be
that your linker file is setup incorrectly.
Regards,
Gordon
Ming Jiang wrote:
> Mr Gordon,
> I noticed that you are the guy who wrote that app. I tried to enter the
command line you just e-mailed to me. I got "Invalid Bank Load
Address" messages instead. What went wrong this time?
>
> >>> 09/20/02 10:31AM >>>
> Ming,
>
> The correct SRecCvt command line for converting a 'banked'
S-Record file to a linear S-Record file for the 9S12DP256 is:
>
> sreccvt -b 16 0x30 32 -o <OutFileName.S19> InFileName.S19
>
> See the description of the -b option in the documentation for further
details.
>
> Regards,
> Gordon
>
> Ming Jiang wrote:
>
> > Hello All,
> > I burned a s2 file with metrowerks tool and tried to flash program it
into the micro using P&E PROG12Z programmer. I realized that I need to use
an app called SRecCvt from Motorola to convert my s2 file into a linear s file
first. Could anybody please tell me the command line that I have to enter in
order to generate a correct linear s file for MC9S12DP256? I followed the
example from documentation and it didn't work.
> > Here is the DOS command I have entered for SRecCvt:
> > SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
> >
> > Regards,
> > Ming Jiang
> >
> >
*************************************************************************
> > IMPORTANT: This email message is for the sole use of the intended
> > recipient(s) and may contain confidential and privileged
information.
> > Any unauthorized review, use, disclosure or distribution is
prohibited.
> > If you are not the intended recipient, please contact the sender by
> > reply email and destroy all copies of the original message. Please
> > advise immediately if you or your employer do not consent to
Internet
> > email for messages of this kind. Opinions, conclusions and other
> > information contained in this e-mail message that do not relate to
the
> > official business of Life Fitness shall be understood as neither
given
> > nor endorsed by it.
> >
*************************************************************************
> >
> >
> >
> >
> > --------------------
> >
> >
> >
> > ">http://docs.yahoo.com/info/terms/
>
> --
> ===============================================================
> Gordon Doughman Ph: 937-438-6811
> Motorola Semiconductor Fax: 937-434-7457
> Field Applications Engineer Pager: 800-759-8352 Pin: 1304089
> Suite 175
> 3131 Newmark Drive
> Miamisburg, OH 45342
>
> Check out my HC12 book at:
> http://www.annatechnology.com/annatech/bookBrowseByMicroF.asp
>
> --------------------
> ">http://docs.yahoo.com/info/terms/
>
>
*************************************************************************
> IMPORTANT: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by
> reply email and destroy all copies of the original message. Please
> advise immediately if you or your employer do not consent to Internet
> email for messages of this kind. Opinions, conclusions and other
> information contained in this e-mail message that do not relate to the
> official business of Life Fitness shall be understood as neither given
> nor endorsed by it.
> *************************************************************************
>
>
> --------------------
>
> ">http://docs.yahoo.com/info/terms/
--
===============================================================
Gordon Doughman Ph: 937-438-6811
Motorola Semiconductor Fax: 937-434-7457
Field Applications Engineer Pager: 800-759-8352 Pin: 1304089
Suite 175
3131 Newmark Drive
Miamisburg, OH 45342
Mr Gordon,
I noticed that you are the guy who wrote that app. I tried to enter the command
line you just e-mailed to me. I got "Invalid Bank Load Address"
messages instead. What went wrong this time?
>>> 09/20/02 10:31AM >>> Ming,
The correct SRecCvt command line for converting a 'banked' S-Record
file to a linear S-Record file for the 9S12DP256 is:
See the description of the -b option in the documentation for further
details.
Regards,
Gordon
Ming Jiang wrote:
> Hello All,
> I burned a s2 file with metrowerks tool and tried to flash program it into
the micro using P&E PROG12Z programmer. I realized that I need to use an app
called SRecCvt from Motorola to convert my s2 file into a linear s file first.
Could anybody please tell me the command line that I have to enter in order to
generate a correct linear s file for MC9S12DP256? I followed the example from
documentation and it didn't work.
> Here is the DOS command I have entered for SRecCvt:
> SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
>
> Regards,
> Ming Jiang
>
>
*************************************************************************
> IMPORTANT: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by
> reply email and destroy all copies of the original message. Please
> advise immediately if you or your employer do not consent to Internet
> email for messages of this kind. Opinions, conclusions and other
> information contained in this e-mail message that do not relate to the
> official business of Life Fitness shall be understood as neither given
> nor endorsed by it.
> *************************************************************************
>
>
> --------------------
>
> ">http://docs.yahoo.com/info/terms/
--
===============================================================
Gordon Doughman Ph: 937-438-6811
Motorola Semiconductor Fax: 937-434-7457
Field Applications Engineer Pager: 800-759-8352 Pin: 1304089
Suite 175
3131 Newmark Drive
Miamisburg, OH 45342
--------------------
">http://docs.yahoo.com/info/terms/
*************************************************************************
IMPORTANT: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message. Please
advise immediately if you or your employer do not consent to Internet
email for messages of this kind. Opinions, conclusions and other
information contained in this e-mail message that do not relate to the
official business of Life Fitness shall be understood as neither given
nor endorsed by it.
*************************************************************************
Reply by Gordon Doughman●September 20, 20022002-09-20
Ming,
The correct SRecCvt command line for converting a 'banked' S-Record
file to a linear S-Record file for the 9S12DP256 is:
See the description of the -b option in the documentation for further
details.
Regards,
Gordon
Ming Jiang wrote:
> Hello All,
> I burned a s2 file with metrowerks tool and tried to flash program it into
the micro using P&E PROG12Z programmer. I realized that I need to use an app
called SRecCvt from Motorola to convert my s2 file into a linear s file first.
Could anybody please tell me the command line that I have to enter in order to
generate a correct linear s file for MC9S12DP256? I followed the example from
documentation and it didn't work.
> Here is the DOS command I have entered for SRecCvt:
> SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
>
> Regards,
> Ming Jiang
>
>
*************************************************************************
> IMPORTANT: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information.
> Any unauthorized review, use, disclosure or distribution is prohibited.
> If you are not the intended recipient, please contact the sender by
> reply email and destroy all copies of the original message. Please
> advise immediately if you or your employer do not consent to Internet
> email for messages of this kind. Opinions, conclusions and other
> information contained in this e-mail message that do not relate to the
> official business of Life Fitness shall be understood as neither given
> nor endorsed by it.
> *************************************************************************
>
>
> --------------------
>
> ">http://docs.yahoo.com/info/terms/
--
===============================================================
Gordon Doughman Ph: 937-438-6811
Motorola Semiconductor Fax: 937-434-7457
Field Applications Engineer Pager: 800-759-8352 Pin: 1304089
Suite 175
3131 Newmark Drive
Miamisburg, OH 45342
Hello All,
I burned a s2 file with metrowerks tool and tried to flash program it into the
micro using P&E PROG12Z programmer. I realized that I need to use an app
called SRecCvt from Motorola to convert my s2 file into a linear s file first.
Could anybody please tell me the command line that I have to enter in order to
generate a correct linear s file for MC9S12DP256? I followed the example from
documentation and it didn't work.
Here is the DOS command I have entered for SRecCvt:
SrecCvt -m c0000 fffff 32 -o LCD_CV1.s19 LCD_CV.s19
Regards,
Ming Jiang
*************************************************************************
IMPORTANT: This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message. Please
advise immediately if you or your employer do not consent to Internet
email for messages of this kind. Opinions, conclusions and other
information contained in this e-mail message that do not relate to the
official business of Life Fitness shall be understood as neither given
nor endorsed by it.
*************************************************************************