"Not Really Me" <scott@validatedQWERTYsoftware.XYZZY.com> wrote:
> jon castillo wrote:
> > Hi,
> >
> > I am looking for a schematic/pinout diagram for the 20-pin arm cable
> > (CA-ARM20 / CK-ARM20) used by this debugger. Does anyone have it?
> > If I am not mistaken it's a simble DB25 to 20-pin header cable. I
> > can't find a pinout for the DB25 connector that connects to the jtag
> > device.
> >
> > Could anyone do a trace using a multimeter and post a pinout
> > diagram? Please help.
> >
> > Best regards,
> > Jon
>
> Jon, I thought the information you need is in app note 10010.pdf.
> But on
> checking, it does not show the cable pin out, only the JTAG connecttor
>
> pinout. I took one apart and it is hand wired inside the shell. It
> does
> not look like a 1 - 1 match either.
>
> Email me direct if you need a copy of the pdf.
>
> Scott
Hi Scott,
Thanks for the reply. I think I have seen these documents but I can't
find a diagram for t
he cable itself. I was hoping someone could take a look inside to trace
how it connects in both ends (debugger side and target board side). I
can't find a diagram anywhere.
Thanks and regards,
Jon
Reply by Not Really Me●January 6, 20092009-01-06
jon castillo wrote:
> Hi,
>
> I am looking for a schematic/pinout diagram for the 20-pin arm cable
> (CA-ARM20 / CK-ARM20) used by this debugger. Does anyone have it?
> If I am not mistaken it's a simble DB25 to 20-pin header cable. I
> can't find a pinout for the DB25 connector that connects to the jtag
> device.
>
> Could anyone do a trace using a multimeter and post a pinout
> diagram? Please help.
>
> Best regards,
> Jon
Jon, I thought the information you need is in app note 10010.pdf. But on
checking, it does not show the cable pin out, only the JTAG connecttor
pinout. I took one apart and it is hand wired inside the shell. It does
not look like a 1 - 1 match either.
Email me direct if you need a copy of the pdf.
Scott
Reply by ●January 5, 20092009-01-05
Hi,
I am looking for a schematic/pinout diagram for the 20-pin arm cable
(CA-ARM20 / CK-ARM20) used by this debugger. Does anyone have it?
If I am not mistaken it's a simble DB25 to 20-pin header cable. I
can't find a pinout for the DB25 connector that connects to the jtag
device.
Could anyone do a trace using a multimeter and post a pinout
diagram? Please help.
Best regards,
Jon
--
--------------------------------- --- -- -
Posted with NewsLeecher v3.8 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -