> I was thinking of simply using a couple of HC08's I've got handy,
> but my concern is: Will I be able to log/trace what goes on at
> 9600/55000 bps? How? Right now I'm reading the section on Monitor
What do you need to log/trace? A serial data stream, right? Are there
monitorable events you can use as good scope triggers?
> always resorted to the Leds-and-Scope approach when it comes to
> real-time response.
And there are a bunch of things you can debug with that.
For your application, it might be time well spent [compared to the cost
of a deep logic analyzer] to build a little session logger that captures
the bidirectional data flow and forwards it to a PC over serial or USB.
That should be no more than a weekend project. And you can have the same
micro strobe an output pin when it detects certain data flowing through.
Reply by Ariel Cornejo●July 22, 20042004-07-22
Regards...
I need to code ISO-7816-3 (contact smartcards, data-link layer) in
some MCU but I'm still pondering my options.
I was thinking of simply using a couple of HC08's I've got handy,
but my concern is: Will I be able to log/trace what goes on at
9600/55000 bps? How? Right now I'm reading the section on Monitor
ROM for the HC08, but it looks quite complicated and it is probably
going to wreck the tight timing required.
Any thoughts/pointers?
Maybe I should dump the HC08 for something featuring BDM?
Background: besides typical x86 low-level asm proggies, I've used
68000s and Z80s (the original thing), asm-level too. Still, I've
always resorted to the Leds-and-Scope approach when it comes to
real-time response.
Thanx in advance...
Ariel Cornejo