On May 14, 7:49=A0pm, Stefan Brr=F6ring <stefan...@broering.de> wrote:
> -jg wrote:
>
> > - it's not ARM-cored, but it is PLC development on a small PCB / uC/
> > Module
>
> The name of the PLC-Software is Codesys. It is also available for ARM
> under windows ce and linux

It looks like a nice tool chain, but does have some commercial
conditions

["As already mentioned, the Programming Tool CoDeSys is free of
charge. In order to program a device with CoDeSys, however, a run time
system must be adapted to the hardware. For this purpose, a  Run Time
Development Package (Starter Package) per platform is necessary. The
price for this starter package is Euros 10.000 .

The next step is to buy one run time license per device. The price
depends on the annual purchase quantity as well as on the type of
controller."]

So they seem to target OEMs, rather than IC vendors Eval Boards, for
example.

-jg

-jg wrote:
> 
> - it's not ARM-cored, but it is PLC development on a small PCB / uC/
> Module

The name of the PLC-Software is Codesys. It is also available for ARM 
under windows ce and linux

best regards

Stefan DF9BI

On May 14, 1:53=A0am, "lars odlen" <lars.od...@safeline.eu> wrote:
> We need to design a specific I/O unit with on board Boolean logic. Would =
be
> good to use industry standard PC based PLC programming tools (because the=
y
> are known and existing). =A0
>
> Is there ready firmware for the ARM7 that holds the PC communication, the
> Boolean logic, debugger and the other standard PLC functions?
>
> Thankfully
>
> Lars.od...@safeline.eu

Someone gave this link a short time ago

http://www.beck-ipc.com/en/index.asp

- it's not ARM-cored, but it is PLC development on a small PCB / uC/
Module

-jg

We need to design a specific I/O unit with on board Boolean logic. Would be
good to use industry standard PC based PLC programming tools (because they
are known and existing).  

Is there ready firmware for the ARM7 that holds the PC communication, the
Boolean logic, debugger and the other standard PLC functions?

Thankfully

Lars.odlen@safeline.eu