On Thu, 21 May 2009 05:28:34 -0500, Marcos_Argentina wrote:
> Guys,
> I am in a development stage of a new project and would like to know if
> these boards can work altogether and if you have any comment regarding
> this:
>
> My project is based on PC/104 factory form, which will use ( among with
> other not PC104 cards I am building )
>
> - TS7200 ( from Embedded Arm )
> - TSADC-16 ( idem )
> - 104-QUAD-4 ( by Access I/O
> - PSMU1K-5A-UPS ( by Advanced Micro Peripherals Ltd )
>
> I am thinking to use Linux as SO. This module ( the one I am developing
> ) will need connectivity with an application in a PC which will run
> Windows XP. Not sure how difficult the integration could be...
>
> Do you have any comment regarding the use of different suppliers in the
> same stack?
>
> Thanks!
>
> Marcos
On May 21, 6:28=A0am, "Marcos_Argentina" <carreras_mar...@yahoo.com.ar>
wrote:
> Do you have any comment regarding the use of different suppliers in the
> same stack?
The whole point of an open architecture is being able to use
components from different suppliers.
Reply by Marcos_Argentina●May 21, 20092009-05-21
Guys,
I am in a development stage of a new project and would like to know if
these boards can work altogether and if you have any comment regarding
this:
My project is based on PC/104 factory form, which will use ( among with
other not PC104 cards I am building )
- TS7200 ( from Embedded Arm )
- TSADC-16 ( idem )
- 104-QUAD-4 ( by Access I/O
- PSMU1K-5A-UPS ( by Advanced Micro Peripherals Ltd )
I am thinking to use Linux as SO. This module ( the one I am developing )
will need connectivity with an application in a PC which will run Windows
XP. Not sure how difficult the integration could be...
Do you have any comment regarding the use of different suppliers in the
same stack?
Thanks!
Marcos