You can check the recent port of lwIP 1.3.0 to the open source QP RTOS-
like state-machine framework available at <www.state-machine.com/
lwip>. This web-page provides a complete example of DHCP, AUTOIP, UDP,
and an advanced web server with Server-Side Includes (SSI) and Common
Gateway Interface (CGI) capabilities. An extensive Application Note is
also provided. The example runs on the LM3S6965 ARM Cortex-M3 MCU, but
is using the ethernet device driver carefully designed for
portability. Adapting the driver to the MCB2300 (NXP LPC2360 MCU)
should be straightforward.
Unlike other existing lwIP adaptations, QP-lwIP integration has been
carefully designed for hard real-time control-type applications, in
which the TCP/IP stack is used to monitor and configure the embedded
device as well as to provide remote user interface (e.g., by means of
a web browser). The QP-lwIP integration uses exclusively the native
event-driven lwIP API. No external RTOS component is needed to achieve
fully deterministic real-time response of active object tasks
prioritized above the lwIP task.
Reply by CBFalconer●June 4, 20092009-06-04
ehoosee wrote:
>
> Anyone ported LWIP+UCOS on MCB2300? I browsed the topics on this
> bbs, but got little information.Someone used ecos or LWIP+FreeRTOS,
> but I do not want to change the UCOS to others. Anyone gives some
> source? thanks.
FYI you are not using a BBS. This is Usenet, which is a world-wide
generally accessible system, with something like 50,000 different
newsgroups on it.
--
[mail]: Chuck F (cbfalconer at maineline dot net)
[page]: <http://cbfalconer.home.att.net>
Try the download section.
Reply by ehoosee●June 4, 20092009-06-04
hi,everybody.
Anyone ported LWIP+UCOS on MCB2300?
I browsed the topics on this bbs,but got little information.Someone used
ecos or LWIP+FreeRTOS,but I do not want to change the UCOS to others.
Anyone gives some source?
thanks.