On Jun 10, 8:18 pm, "USB wcam" <wjimen...@hotmail.com> wrote:
> Hi, I need to develop a embedded hardware (with a FPGA, example Xilinx(R)
> Spartan-3AN FPGA) capable of IDENTIFY what kind of USB web cam is
> plugged-in (example webcam manufacturer, speed, data transfer rate, etc.),
1) This is an embedded processor task, not an FPGA task. Find one
with USB host mode, or
use a SPI-controllable USB host chip
2) Your best bet is to query the VID/PID and look it up in a database
to determine the other parameters
Reply by USB wcam●June 10, 20092009-06-10
Hi, I need to develop a embedded hardware (with a FPGA, example Xilinx(R)
Spartan-3AN FPGA) capable of IDENTIFY what kind of USB web cam is
plugged-in (example webcam manufacturer, speed, data transfer rate, etc.),
the USB will work with USB 1.0 or USB 1.1 (not USB 2.0) so a USB 2.0 web
cam will work at USB 1.1. Due this is a embedded design, no computer
interaction is required (this means that the USB web cam will not be
plugged-in to a computer).
Any idea about it
Thanks in advanced.
Warner