>I am using A360 PCB mill/drill ( www.accuratecnc.com ) to make my
>prototypes.
>Lately I need to fabricate small batches (up to 10).
>Because of this, I am looking for real copper metallization.
>Conductive inks (like ProConduct) of LPKF are not good enough for me.
>Is there any body that can recommend me a system at good price and what
>real experience has with it?
>
>
>
On Wed, 24 Jun 2009 21:36:39 -0500, the renowned "hex16"
<comutel@gmail.com> wrote:
>I am using A360 PCB mill/drill ( www.accuratecnc.com ) to make my
>prototypes.
>Lately I need to fabricate small batches (up to 10).
>Because of this, I am looking for real copper metallization.
>Conductive inks (like ProConduct) of LPKF are not good enough for me.
>Is there any body that can recommend me a system at good price and what
>real experience has with it?
My system is that I send the Gerber files out to one of several
vendors, and get high-quality complete boards back in a few days. Lots
of real experience, and very good price.
Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
speff@interlog.com Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com
Reply by hex16●June 24, 20092009-06-24
I am using A360 PCB mill/drill ( www.accuratecnc.com ) to make my
prototypes.
Lately I need to fabricate small batches (up to 10).
Because of this, I am looking for real copper metallization.
Conductive inks (like ProConduct) of LPKF are not good enough for me.
Is there any body that can recommend me a system at good price and what
real experience has with it?