petermccormick1 wrote:
> We have used Keil Uv2 (assemblers & C) and
Ceibo emulators &
> programmers for the 87C554 family of chips for years. The 87C is
> great but it is becoming an antique. We are migrating to the LPC2114
> and have purchased the Keil Ulink and MCB2100 to ramp up. Keil does
> not seem to have much sample code to work with the MCB2100 for
> starters. Are there any web sites with code, flash programming
> examples, UART, Hello world.... examples so the learning curve
isn't
> quite so steep?
The MCB2100 stuff does come with an example, called Blinky. There's two
versions - one that reads from the ADC to flash the LEDs at a rate
controlled by the analogue in, which outputs to UART1 the current ADC
reading at regular intervals, and another that doesn't do this but
instead uses a timer interrupt.
The timer version is at:
http://www.keil.com/download/docs/lpc2100_blinky.zip.asp
The ADC version was on the installation disk somewhere... look for a
directory called Examples under c:\keil
>
> Thanks, Peter
>
ABS