Reply by ahuy82 September 27, 20092009-09-27
I would take a look at the Cortex-M3 series from Luminary Micro.  Do a
quick search on their site and here is one of the devices can fulfill your
need:

http://www.luminarymicro.com/products/lm3s2793.html

--------------------------------------------------------------------------------
Embedded Professionals
Your professionals in Embedded Electronics and Firmware Design Service
info@embpros.com

	   
					
---------------------------------------		
This message was sent using the comp.arch.embedded web interface on
http://www.EmbeddedRelated.com
Reply by ju September 25, 20092009-09-25
>> The ST 32F101xC (http://www.st.com/mcu/devicedocs-STM32F101ZC-110.html) >> could also do the job but I'm a bit upset that the 'V' version could
only
>> manage Flash and PSRAM. Is PSRAM really obsolete? >> > >Do you plan to execute code from this SRAM or not? > >I hear from the AT91 team, that Cortex-M3 does not excel >when executing from external memory, and that the SAM7SE >has higher bandwidth/throughput. > >Anyone seen this in their own system? > >BR >Ulf Samuelsson
Thanks for your reply, No I do not plan to execute code from an external RAM, I just need some space to save datas. I just don't want to start the developpement with this PSRAM if I can buy it anymore in 5 years. I'll plobably chose a ST 32F101xZ one and use some SRAM. Cheers --------------------------------------- This message was sent using the comp.arch.embedded web interface on http://www.EmbeddedRelated.com
Reply by Ulf Samuelsson September 24, 20092009-09-24
ju skrev:
> Hi folks, I'm looking for a micro controller for an embedded project. > I need for this project 3 UARTs and an external memory controller for > 1MBytes (probably RAM) but a DSP is not necessary because I'll not have to > deal with heavy calculations. > > I've found the Atmel SAM3U2C > (http://www.atmel.com/dyn/products/product_card.asp?part_id=4566) which > seems pretty good for what I want to do but the status is on 'Sampling', > could anyone tell me more about its commercialization. >
Not in production yet, but devkits has been around for 4 months so I think it is not very far away.
> The ST 32F101xC (http://www.st.com/mcu/devicedocs-STM32F101ZC-110.html) > could also do the job but I'm a bit upset that the 'V' version could only > manage Flash and PSRAM. Is PSRAM really obsolete? >
Do you plan to execute code from this SRAM or not? I hear from the AT91 team, that Cortex-M3 does not excel when executing from external memory, and that the SAM7SE has higher bandwidth/throughput. Anyone seen this in their own system? BR Ulf Samuelsson
> I'll keep searching with others manufacturers but if you have some advices > or brand in mind please tell me. > > Cheers. > > Ju > > > > --------------------------------------- > This message was sent using the comp.arch.embedded web interface on > http://www.EmbeddedRelated.com
Reply by TTman September 23, 20092009-09-23
"ju" <jdano@enib.fr> wrote in message 
news:ZOadnS2Rv_c9mSfXnZ2dnUVZ_jednZ2d@giganews.com...
> Hi folks, I'm looking for a micro controller for an embedded project. > I need for this project 3 UARTs and an external memory controller for > 1MBytes (probably RAM) but a DSP is not necessary because I'll not have to > deal with heavy calculations. > > I've found the Atmel SAM3U2C > (http://www.atmel.com/dyn/products/product_card.asp?part_id=4566) which > seems pretty good for what I want to do but the status is on 'Sampling', > could anyone tell me more about its commercialization.
Ask your local Atmel sales office...........
Reply by ju September 23, 20092009-09-23
Hi folks, I'm looking for a micro controller for an embedded project.
I need for this project 3 UARTs and an external memory controller for
1MBytes (probably RAM) but a DSP is not necessary because I'll not have to
deal with heavy calculations.

I've found the Atmel SAM3U2C
(http://www.atmel.com/dyn/products/product_card.asp?part_id=4566) which
seems pretty good for what I want to do but the status is on 'Sampling',
could anyone tell me more about its commercialization.

The ST 32F101xC (http://www.st.com/mcu/devicedocs-STM32F101ZC-110.html)
could also do the job but I'm a bit upset that the 'V' version could only
manage Flash and PSRAM. Is PSRAM really obsolete?

I'll keep searching with others manufacturers but if you have some advices
or brand in mind please tell me.

Cheers.

Ju

	   
					
---------------------------------------		
This message was sent using the comp.arch.embedded web interface on
http://www.EmbeddedRelated.com