Reply by Ulf Samuelsson●September 29, 20092009-09-29
pj0585 skrev:
> Hi,
>
> Has anyone added new board support for AT91RM9200-EK to SAM-BA? If anyone
> has, then can you please send the files that were modified or give me
> indications on how to go about this.
> I'm surprised that atmel has not added support for this board in SAM-BA.
>
> pj0585
It is not surprising, since the AT91RM9200 bootROM is vastly
different from the SAM9 series bootROM, and among other
things, does not run SAMBAboot.
You download code to the AT91RM9200 , either using DFU on USB
or through X-Modem on the UART
You need to find the files "loader.bin" and "boot.bin" for parallel
flash and dataflashboot.bin for the serial AT45 dataflash.
BR
Ulf Samuelsson
>
> ---------------------------------------
> This message was sent using the comp.arch.embedded web interface on
> http://www.EmbeddedRelated.com
Reply by Ulf Samuelsson●September 29, 20092009-09-29
pj0585 skrev:
> Hi,
>
> Has anyone added new board support for AT91RM9200-EK to SAM-BA? If anyone
> has, then can you please send the files that were modified or give me
> indications on how to go about this.
> I'm surprised that atmel has not added support for this board in SAM-BA.
>
> pj0585
It is not surprising, since the AT91RM9200 bootROM is vastly
different from the SAM9 series bootROM, and among other
things, does not run SAMBAboot.
You download code to the AT91RM9200 , either using DFU on USB
or through X-Modem on the UART
You need to find the files "loader.ini" and "boot.ini".
BR
Ulf Samuelsson
>
> ---------------------------------------
> This message was sent using the comp.arch.embedded web interface on
> http://www.EmbeddedRelated.com
Reply by pj0585●September 26, 20092009-09-26
Hi,
Has anyone added new board support for AT91RM9200-EK to SAM-BA? If anyone
has, then can you please send the files that were modified or give me
indications on how to go about this.
I'm surprised that atmel has not added support for this board in SAM-BA.
pj0585
---------------------------------------
This message was sent using the comp.arch.embedded web interface on
http://www.EmbeddedRelated.com