> Hi,
>
> I am trying to use Eclipse on a Linux machine for ARM development, but
> can get to understand how to install the arm tool chain on to Eclipse.
>
Try typing into Google "eclipse arm toolchain".
--
// This is my opinion.
Reply by David Brown●October 1, 20092009-10-01
aquibf wrote:
> Hi,
>
> I am trying to use Eclipse on a Linux machine for ARM development, but can'
> get to understand how to install the arm tool chain on to Eclipse.
>
> I am looking for docs, tutorials or direct help that will allow me
> configure Eclipse to compile c code for the arm processor.
>
Try www.codesourcery.com. They will sell you a package with Eclipse and
gcc integrated for $400. You get the most up-to-date ARM gcc and
support from the people who maintain the ARM port, some useful
libraries, and Eclipse and gdb integration. Since you are asking such a
"getting started" question in a newsgroup, it's a fair assumption that
CodeSourcery will save you at least $400 worth of time.
Reply by Bob●October 1, 20092009-10-01
On 30 Sep, 23:28, "aquibf" <aqu...@gmail.com> wrote:
> I am looking for docs, tutorials or direct help that will allow me
> configure Eclipse to compile c code for the arm processor.
I have been looking for the same thing, you may find this link useful
http://carrierwave.wordpress.com/
I ended up using a Windows platform instead using the Yagarto setup, a
lot of the config is probably similar though.
Hth
Reply by Atilla●October 1, 20092009-10-01
You should manually install a "command line" tool chain and then configure your
eclise setup the directories.
aquibf wrote:
> Hi,
>
> I am trying to use Eclipse on a Linux machine for ARM development, but can'
> get to understand how to install the arm tool chain on to Eclipse.
>
> I am looking for docs, tutorials or direct help that will allow me
> configure Eclipse to compile c code for the arm processor.
>
>
>
> ---------------------------------------
> This message was sent using the comp.arch.embedded web interface on
> http://www.EmbeddedRelated.com
Reply by aquibf●September 30, 20092009-09-30
Hi,
I am trying to use Eclipse on a Linux machine for ARM development, but can'
get to understand how to install the arm tool chain on to Eclipse.
I am looking for docs, tutorials or direct help that will allow me
configure Eclipse to compile c code for the arm processor.
---------------------------------------
This message was sent using the comp.arch.embedded web interface on
http://www.EmbeddedRelated.com