Master or Client? Cypress has an EZ-USB (client) development board. (on
digi-key for about $500.)
They also offer a USB-OTG (2.0 spec for one part that is master and client)
and a few Master devices.
I believe the EZ-USB is hi speed capable. It is V2.0 compliant. Don't know
if this is something like what you need. The EZ-USB chip has an 8051
(modified/enhanced) cpu that includes about 18 GP IO lines. Code is loaded
from the USB or an external I2C EEPROM.
-Bart
On Thu, 01 Jul 2004 21:50:13 GMT, Rick wrote:
>
>
>Is there currently a high speed (480Mbs) USB 2.0 general IO board available
>anywhere? Perhaps one using an FPGA?
>
>I know there is a vhdl design finished on opencores.org, but I did not see a
>mention of anyone producing the actual physical device.
>
>Thanks,
>
>Rick
>
>
Reply by Tom Woodrow●July 1, 20042004-07-01
http://www.usbee.com/usbeeex2.html
Most likely not just what you want, but a place to start.
Tom Woodrow
Rick wrote:
> Is there currently a high speed (480Mbs) USB 2.0 general IO board available
> anywhere? Perhaps one using an FPGA?
>
> I know there is a vhdl design finished on opencores.org, but I did not see a
> mention of anyone producing the actual physical device.
>
> Thanks,
>
> Rick
>
>
Reply by Rick●July 1, 20042004-07-01
Is there currently a high speed (480Mbs) USB 2.0 general IO board available
anywhere? Perhaps one using an FPGA?
I know there is a vhdl design finished on opencores.org, but I did not see a
mention of anyone producing the actual physical device.
Thanks,
Rick