It is Project>Properties then click on Linker tab and set Additional
Output Format to hex.
-----Original Message-----
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...] On Behalf Of
ak_invincible007
Sent: Thursday, December 15, 2005 8:47 PM
To: lpc2000@lpc2...
Subject: [lpc2000] Generating Hex file from crossworks compiler
Hi
I've recently started with olimex LPC2106 kit, using Crosswork C
Compiler. I would like to know what are the setting required to
generate Intel hex file which would be used with philips flash
utility. Currently i'm geting object file & elf file on building.
----- Original Message -----
From: "ak_invincible007" <ak_invincible007@ak_i...>
To: <lpc2000@lpc2...>
Sent: Thursday, December 15, 2005 3:17 PM
Subject: [lpc2000] Generating Hex file from crossworks compiler
> Hi
> I've recently started with olimex LPC2106 kit, using Crosswork C
> Compiler. I would like to know what are the setting required to
> generate Intel hex file which would be used with philips flash
> utility. Currently i'm geting object file & elf file on
building.
I think it's Project>Properties then click on Linker tab and set
Additional
Output Format to hex.
Leon
---
[This E-mail has been scanned for viruses but it is your responsibility
to maintain up to date anti virus software on the device that you are
currently using to read this email. ]
Reply by ak_invincible007●December 15, 20052005-12-15
Hi
I've recently started with olimex LPC2106 kit, using Crosswork C
Compiler. I would like to know what are the setting required to
generate Intel hex file which would be used with philips flash
utility. Currently i'm geting object file & elf file on building.