|
Hi, We have an Application Product Brief at http://www.ashling.com/technicalarticles/APB156-V5U-ARMConnect.pdf that outlines pinouts and recommended connectors for ARM EmbeddedICE and ETM debug. We recommend the AMP MICTOR 38-way receptacle connector, 0.025" pitch, such as AMP part number 2-767004-2. Hugh @ http://www.ashling.com/support/lpc2100/ > -----Original Message----- > From: Leon Heller [mailto:] > Sent: 21 February 2004 17:03 > To: > Subject: Re: [lpc2000] Specifications for 38 pin Mictor Connector > > ----- Original Message ----- > From: "vrrraju" <> > To: <> > Sent: Saturday, February 21, 2004 3:36 PM > Subject: [lpc2000] Specifications for 38 pin Mictor Connector > > Dear Friends, > > > > I am designing a board for LPC2106 which I want to have > provision for > > ETM trace and secondary JTAG. I want to have a 38-pin Mictor > > connector for the same. Please suggest me which one to use > and where > > can I find one for my board. I need full specs for the same. > > Samtec makes compatible connectors, they might be easier to find. > > Leon > -- > Leon Heller, G1HSM > Email: > My low-cost Philips LPC210x ARM development system: > http://webspace.webring.com/people/jl/leon_heller//lpc2104.h> tml > > Yahoo! > Groups Links > > http://groups.yahoo.com/group/lpc2000/ > > |
