Reply by cbar...@aol.com●August 13, 20102010-08-13
On Aug 12, 1:13=A0pm, "ckrusen" <ckrusen@n_o_s_p_a_m.comcast.net> wrote:
> I need the documentation for 2500 AD's Macro Assembler X6809
>
> Running X6809 with no command line options yields:
>
> c:\asmb09>x6809
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A06809 Macro Assembler =A0 - =A0 Ver=
sion 4.02a
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 Copyright (C) 1985 by 2500 A.D. Software,=
Inc.
>
> Listing Destination =A0(N, T, D, E, L, P, <CR> =3D N) : n
>
> I then press Ctrl+C and the program exits.
>
> At a minimum I need the command line options.
>
> Any help would be greatly appreciated.
>
> P.S. documentation for the utilities LINK09.exe and HEX.exe (also ver 4.0=
2a
> by 2500 AD) would be helpful to!
>
> --------------------------------------- =A0 =A0 =A0 =A0
> Posted throughhttp://www.EmbeddedRelated.com
None,Terminal,Printer,Disk,Error only,List on/off. Select an option
and follow the prompts.
Or use the command line option x6809 [-q] input_filename
[output_filename] [-t, -p, -px, -d, -dx, -d,drive:, -d,\dir\, -et, -
ep, -ede, -lt, -lp, -ld]
anything inside brackets are optional, dont type the brackets.
Reply by dsco...@rcn.com●August 12, 20102010-08-12
On Aug 12, 8:13=A0am, "ckrusen" <ckrusen@n_o_s_p_a_m.comcast.net> wrote:
> I need the documentation for 2500 AD's Macro Assembler X6809
>
> Running X6809 with no command line options yields:
>
> c:\asmb09>x6809
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A06809 Macro Assembler =A0 - =A0 Ver=
sion 4.02a
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 Copyright (C) 1985 by 2500 A.D. Software,=
Inc.
>
> Listing Destination =A0(N, T, D, E, L, P, <CR> =3D N) : n
>
> I then press Ctrl+C and the program exits.
>
> At a minimum I need the command line options.
>
> Any help would be greatly appreciated.
>
> P.S. documentation for the utilities LINK09.exe and HEX.exe (also ver 4.0=
2a
> by 2500 AD) would be helpful to!
>
> --------------------------------------- =A0 =A0 =A0 =A0
> Posted throughhttp://www.EmbeddedRelated.com
I need the documentation for 2500 AD's Macro Assembler X6809
Running X6809 with no command line options yields:
c:\asmb09>x6809
6809 Macro Assembler - Version 4.02a
Copyright (C) 1985 by 2500 A.D. Software, Inc.
Listing Destination (N, T, D, E, L, P, <CR> = N) : n
I then press Ctrl+C and the program exits.
At a minimum I need the command line options.
Any help would be greatly appreciated.
P.S. documentation for the utilities LINK09.exe and HEX.exe (also ver 4.02a
by 2500 AD) would be helpful to!
---------------------------------------
Posted through http://www.EmbeddedRelated.com