On 2011-06-10, vever <verfaillie.romain@n_o_s_p_a_m.gmail.com> wrote:
> So, I come back on my question. You said I can load redboot and my
> program together and configure an autostart of my program by redboot.
>
> Do you have a guide which is about this ?
So, I come back on my question.
You said I can load redboot and my program together and configure an
autostart of my program by redboot.
Do you have a guide which is about this ?
Or someone who has already done that could help me ?
Thank you !
Vever
---------------------------------------
Posted through http://www.EmbeddedRelated.com
Reply by vever●June 7, 20112011-06-07
Okay thanks!
I have just succeeded to do that (load program without redboot).
But when I load the program into flash via JTAG (openocd), it bug the jtag
communication, and I can't connect to my card with Openocd. (I must erase
flash with FlashMagic and re connect with openocd)
---------------------------------------
Posted through http://www.EmbeddedRelated.com
Reply by Grant Edwards●June 7, 20112011-06-07
On 2011-06-07, vever <verfaillie.romain@n_o_s_p_a_m.gmail.com> wrote:
> I would program an AMR7 LPC2138 with eCos and redboot.
>
> But there is not enough RAM to load the program on it. (with a load
> command).
>
> I wonder if you know if I can directly load my program into flash and
> start it by redboot from flash.
Yes.
> Or if I can load redboot and my program together into flash and make
> redboot to start the program alone.
Yes, you can do that also.
--
Grant Edwards grant.b.edwards Yow! I have a VISION! It's
at a RANCID double-FISHWICH on
gmail.com an ENRICHED BUN!!
Reply by vever●June 7, 20112011-06-07
Hello.
I would program an AMR7 LPC2138 with eCos and redboot.
But there is not enough RAM to load the program on it. (with a load
command).
I wonder if you know if I can directly load my program into flash and start
it by redboot from flash.
Or if I can load redboot and my program together into flash and make
redboot to start the program alone.
Thank you very much!
Vever
---------------------------------------
Posted through http://www.EmbeddedRelated.com