Thanks Dominic,
I would be building a prototype so that'll help.
Cheers,
Vineet.
Dominic Rath <Dominic.Rath@Domi...> wrote: Hello Vineet,
there's been a lengthy discussion a few weeks ago about the use of the
RTCK
signal with low-speed devices like Wiggler-Clones. Basically you don't
have
to connect the signal, but if you want to know more about this, search the
group archives. The thread's name was "JTAG - RTCK?".
Regards,
Dominic
On Saturday 11 February 2006 11:53, vineet jain wrote:
> Hello all,
> Refering to the schematics in the group repository, can anyone tell, how
> is the RTCK pin of the JTAG has to be connected. I am refering to Leon
> Heller's schematic.
>
> Cheers,
> Vineet.
SPONSORED LINKS
Microcontrollers
Microprocessor
Intel microprocessors
Pic microcontrollers
---------------------------------
YAHOO! GROUPS LINKS
---------------------------------
__________________________________________________
Hello Vineet,
there's been a lengthy discussion a few weeks ago about the use of the RTCK
signal with low-speed devices like Wiggler-Clones. Basically you don't have
to connect the signal, but if you want to know more about this, search the
group archives. The thread's name was "JTAG - RTCK?".
Regards,
Dominic
On Saturday 11 February 2006 11:53, vineet jain wrote:
> Hello all,
> Refering to the schematics in the group repository, can anyone tell, how
> is the RTCK pin of the JTAG has to be connected. I am refering to Leon
> Heller's schematic.
>
> Cheers,
> Vineet.
Reply by vineet jain●February 11, 20062006-02-11
Hello all,
Refering to the schematics in the group repository, can anyone tell, how is
the RTCK pin of the JTAG has to be connected. I am refering to Leon
Heller's schematic.
Cheers,
Vineet.
__________________________________________________