Reply by montserret_maxime●February 7, 20062006-02-07
Thanks a lot , now it's working
Reply by Erich Styger●February 7, 20062006-02-07
Probably you did a mistake in the s19 file?
You can as well use the burner.exe (in the prog folder) to merge s19 files.
Here briefly how to do it:
Create file e.g. Named burner.cmd with following (default) content:
OPENFILE "output.s19"
format=motorola
busWidth=1
origin=0
len=0x10000
destination=0
SRECORD=Sx
SENDBYTE 1 "my_file_1.s19"
SENDBYTE 1 "my_file_2.s19"
CLOSE
Then call the file e.g. With
Burner.exe -f burner.cmd
Erich
Reply by Edward Karpicz●February 7, 20062006-02-07
"montserret_maxime" wrote:
> I'm trying to merge manually.
> I introduce some lines between other lines (that introduces a
> discontinuity) like that :
> S107D48074650000CB
>
S123DF8CCDAECDA4CD9ACD90CD86CD7CCD72CD68CD5ECD54CD4ACD40CD36CD2CC6A6C6F5FE
Discontinuity of address isn't a problem, second line has bad checksum.
Reply by montserret_maxime●February 7, 20062006-02-07
I'm trying to merge manually.
I introduce some lines between other lines (that introduces a
discontinuity) like that :
S107D48074650000CB
S123DF8CCDAECDA4CD9ACD90CD86CD7CCD72CD68CD5ECD54CD4ACD40CD36CD2CC6A6C6F5FE
The loading failed.
I'm using True-Time Simulator to download code on the target.
It means that loader application doesn't support discontinuity , or
some think like that.
Have you got any ideas ???
Many thaks in advance.
Reply by Edward Karpicz●February 7, 20062006-02-07
Remove S9 from your app.s19, remove S0 lines from both, then
copy app.s19 + boot.s19 appwithboot.s19
Make sure app.s19 has newline at the end after S9 removal since multiple
records in one line SxxxSxxx may not work with all programmers/
bootloaders.
Edward
Reply by montserret_maxime●February 7, 20062006-02-07
Hi everyBody,
I'm working on MC9S12DG256B device. I've developed an application
and
a bootloader with different S-Record files. I'd like to know if
it's
possible to merge the 2 files in order to make a single file
containing the 2 programs.
If yes, why ???
And which value must I put in header line and control line ???
Many thanks in advance.