Reply by Thiadmer Riemersma ITB CompuPhase●February 17, 20062006-02-17
Hello Tom,
> I have used the lpc21isp.c to program the LPC21xx
parts. It is
> problematic, but it does work. [...]
That may be related to minor differences in RS232 support and
handshaking of the DST/DTR and/or RTS/CTS lines. I initially had more
problems with the Philips utility than with lpc21isp.
I do main development under Linux, but I use Windows for on-site bug
fixing with a laptop. I use lpc21isp on both platforms.
Kind regards,
Thiadmer Riemersma
Reply by Martin Maurer●February 16, 20062006-02-16
Hello Tom,
a few correction:
> I have used the lpc21isp.c to program the LPC21xx
parts. It is
> problematic, but it does work. You can probably find the most recent
> copy at: http://www.aeolusdevelopment.com
The latest official version (1.33) can be found on
http://guest.engelschall.com/~martin/lpc21xx/isp/index.html
It runs under Windows, Cygwin and Linux. If you have another OS, you must
compile it yourself.
Development versions (currently version 1.34) can be found on
http://groups.yahoo.com/group/lpc21isp/ (registration needed)
> AFAICT, the lpc21isp.c is a multi purpose tool
> to program the AVR and LPC2000 parts in standalone (running under linux)
> or can be incorported into the controller to program other controllers.
This is wrong: lpc21isp is mainly for LPC2000 parts, AVRs are not supported.
But there is also a support for Analog Devices ADUC 70xx (but i haven't
tested these).
But if you need help, feel free to contact me !
Regards,
Martin
Reply by Robert Adsett●February 16, 20062006-02-16
At 06:11 PM 2/15/06 -0500, Tom Walsh wrote:
>I have used the lpc21isp.c to program the LPC21xx
parts. It is
>problematic, but it does work. You can probably find the most recent
>copy at: http://www.aeolusdevelopment.com
A link anyway. Also one to Paul's graphical download utility. I
don't
think it's been tracking the variations as closely but I haven't
looked in
a bit so I could be wrong.
I would be curious as to what you found to be the problem areas. I've just
done a revision adding multiple file inputs and am about to (probably
slowly) merge it in with the changes others have made to the program and
maybe convince Martin it's time to release another non-test
version. While I'm at it maybe I can address some of the things you ran
into or note them as items that need addressing.
Robert
" 'Freedom' has no meaning of itself. There are always
restrictions, be
they legal, genetic, or physical. If you don't believe me, try to chew a
radio signal. " -- Kelvin Throop, III
http://www.aeolusdevelopment.com/
Reply by George M. Gallant, Jr.●February 15, 20062006-02-15
I have been using lpc2k_pgm by Paul Stoffregen. Slight mods needed to
build
with Fedora Core 4. Works great with Olimex 2214 board.
Notes: USB/Terminal driver in Linux hangs at random times.
File selector not very intuitive.
George
Linux
On Wed, 2006-02-15 at 18:11 -0500, Tom Walsh wrote:
> Uwe Arends wrote:
>
> >Tom & Steve,
> >
> >
> >
> >>>Hi all, I'm just setting up for development with the
Elektor ARMee
> >>>LPC2106 module. I would prefer to do the development under
Linux
> >>>rather than Windows. I have the GNU toolchain built and
running,
> now
> >>>for the final bit. Is there a flash downloader for Linux or
does
> >>>using the Philips utility effectively force me to switch to
> Windows.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>Switch to Windows...
> >>
> >>
> >
> >
> >
> I just couldn't resist that, a night of chasing an obscure bug in my
> program left me in a foul mood. heh.
>
> I have used the lpc21isp.c to program the LPC21xx parts. It is
> problematic, but it does work. You can probably find the most recent
> copy at: http://www.aeolusdevelopment.com
>
> What I finally did was to write my own uploader. It took a few days
> to
> write, but I needed something that I understood how it worked and
> could
> change it if necessary. AFAICT, the lpc21isp.c is a multi purpose
> tool
> to program the AVR and LPC2000 parts in standalone (running under
> linux)
> or can be incorported into the controller to program other
> controllers.
>
> For my needs, the Flash programming utility in the Abatron BDI2000
> makes
> programming the Flash memories so much easier. There are two LPC2000
> parts on my board, LPC2106 + LPC2138, and they are daisy chained
> together. The Abatron will program either one using a simple telnet
> session.
>
> TomW
>
> >isn't the lpc21isp.exe by Martin Maurer said to be available under
> >linux as well? Don't know for sure, but googling for it may be
> >worthwhile.
> >
> >-uwe
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Tom Walsh - WN3L - Embedded Systems Consultant
> http://openhardware.net,http://cyberiansoftware.com
> "Windows? No thanks, I have work to do..."
> ----------------
>
>
>
>
>
> SPONSORED LINKS
>
> Microcontrollers
> Microprocessor
> Intel microprocessors
> Pic microcontrollers
>
>
>
> ______________________________________________________________________
> YAHOO! GROUPS LINKS
>
>
> 1.
>
>
>
> ______________________________________________________________________
>
>
Reply by Tom Walsh●February 15, 20062006-02-15
Uwe Arends wrote:
>Tom & Steve,
>
>
>
>>>Hi all, I'm just setting up for development with the Elektor
ARMee
>>>LPC2106 module. I would prefer to do the development under Linux
>>>rather than Windows. I have the GNU toolchain built and running,
now
>>>for the final bit. Is there a flash downloader for Linux or does
>>>using the Philips utility effectively force me to switch to Windows.
>>>
>>>
>>>
>>>
>>>
>>Switch to Windows...
>>
>>
>
>
>
I just couldn't resist that, a night of chasing an obscure bug in my
program left me in a foul mood. heh.
I have used the lpc21isp.c to program the LPC21xx parts. It is
problematic, but it does work. You can probably find the most recent
copy at: http://www.aeolusdevelopment.com
What I finally did was to write my own uploader. It took a few days to
write, but I needed something that I understood how it worked and could
change it if necessary. AFAICT, the lpc21isp.c is a multi purpose tool
to program the AVR and LPC2000 parts in standalone (running under linux)
or can be incorported into the controller to program other controllers.
For my needs, the Flash programming utility in the Abatron BDI2000 makes
programming the Flash memories so much easier. There are two LPC2000
parts on my board, LPC2106 + LPC2138, and they are daisy chained
together. The Abatron will program either one using a simple telnet
session.
TomW
>isn't the lpc21isp.exe by Martin Maurer said
to be available under
>linux as well? Don't know for sure, but googling for it may be
>worthwhile.
>
>-uwe
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
--
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net,http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------
Reply by Bryce Himebaugh●February 15, 20062006-02-15
Tom & Steve,
>>Hi all, I'm just setting up for
development with the Elektor ARMee
>>LPC2106 module. I would prefer to do the development under Linux
>>rather than Windows. I have the GNU toolchain built and running, now
>>for the final bit. Is there a flash downloader for Linux or does
>>using the Philips utility effectively force me to switch to Windows.
>>
>>
>>
> Switch to Windows...
isn't the lpc21isp.exe by Martin Maurer said to be available under
linux as well? Don't know for sure, but googling for it may be
worthwhile.
-uwe
Reply by Tom Walsh●February 15, 20062006-02-15
steve_moorby wrote:
>Hi all, I'm just setting up for development
with the Elektor ARMee
>LPC2106 module. I would prefer to do the development under Linux
>rather than Windows. I have the GNU toolchain built and running, now
>for the final bit. Is there a flash downloader for Linux or does
>using the Philips utility effectively force me to switch to Windows.
>
>
>
Switch to Windows...
--
Tom Walsh - WN3L - Embedded Systems Consultant
http://openhardware.net,http://cyberiansoftware.com
"Windows? No thanks, I have work to do..."
----------------
Reply by steve_moorby●February 15, 20062006-02-15
Hi all, I'm just setting up for development with the Elektor ARMee
LPC2106 module. I would prefer to do the development under Linux
rather than Windows. I have the GNU toolchain built and running, now
for the final bit. Is there a flash downloader for Linux or does
using the Philips utility effectively force me to switch to Windows.
Thanks
Steve
