Reply by Robert Adsett February 18, 20062006-02-18
At 01:14 AM 2/18/06 -0800, Mukadder CEYHAN wrote:
>Is there any document or source code to explain the
>procedure of activating the bootloader and loading the
>code algorithm in lpc2000 devices???

The documentation is in the user manual.  There are several programs with 
source around that implement it.
         lpc21isp http://guest.engelschall.com/~martin/lpc21xx/isp/index.html
         lpc2k_pgm http://www.pjrc.com/arm/lpc2k_pgm/

Both can automatically control the reset and ISP  mode pins and supporting 
that can be as simple as adding the standard ISP header 
http://www.open-research.org.uk/ARMuC/Standard_ISP_Header.html and using a 
simple adapter like 
http://www.aeolusdevelopment.com/Articles/InSystemProgramming.html

Robert

" 'Freedom' has no meaning of itself.  There are always restrictions,   be 
they legal, genetic, or physical.  If you don't believe me, try to chew a 
radio signal. "  -- Kelvin Throop, III
http://www.aeolusdevelopment.com/
	

An Engineer's Guide to the LPC2100 Series

Reply by Rajnikant ghodasara February 18, 20062006-02-18
No ideas but u can use www.hites.co.uk for detail
	--- Mukadder CEYHAN <mukadder_c@muka...> wrote:

> Is there any document or source code to explain
the
> procedure of activating the bootloader and loading
> the
> code algorithm in lpc2000 devices???
> 
> regards
> 
> mukadder
> 
> __________________________________________________
>  
>
	__________________________________________________
 

Reply by Mukadder CEYHAN February 18, 20062006-02-18
Is there any document or source code to explain the
procedure of activating the bootloader and loading the
code algorithm in lpc2000 devices???

regards

mukadder

__________________________________________________