Hey Mark, great to have you back. Hope all is going well.
I will address your questions below.
Bob Smith
--- Avoid computer viruses, Practice safe hex ---
-- Specializing in small, cost effective, embedded control systems --
http://www.smithmachineworks.com/embedprod.html
Robert L. (Bob) Smith
Smith Machine Works, Inc.
9900 Lumlay Road
Richmond, VA 23236 804/745-1065
----- Original Message -----
From: "Mark Schultz" <>
To: <>
Sent: Thursday, April 01, 2004 8:08 PM
Subject: [m68HC11] HC11 Tools & Resources
> Some of the "old timers" here might
recognize me back from the days
> when I was a active participant on the old mot-68hc11 mailing list a
> few years back. At that time, I was actively developing application
> (s) for the HC11 and had a pretty good handle on what tools
> (software) were available for doing development work with the HC11.
>
> After I finished my last work-related HC11 project, my participation
> on the hc11 list waned, as did my active knowledge of the "state of
> the market" for HC11-related tools and resources. I would like to
> get back up-to-speed with HC11 development, esp. as it pertains to
> getting up-to-date tools and documentation. I am contemplating a
> (personal) project that would incorporate numerous HC11's, most of
> which would be used as simple I/O controllers in a I/O-intensive
> application. I have quite a few 68HC711E9's and E20's (with
> previously-burned OTP ROMs but still usable for very simple apps
> that could fit in the 512-byte EEPROM) as well as a good number of
> UV-EPROM E9's and at least one tube's worth of E2's.
Hang on to those E2's, they are obsolete and are becomming valuable.
> I had in mind
> to build one of those scrolling LED displays using a bunch of
> otherwise-useless 711E20's (with internal ROM disabled) as I/O
> controllers to drive (via appropriate buffering) multiple 5x7-matrix
> LED blocks that I picked up as cheap surplus.
>
> Although it has been a few years since I've written any HC11 code,
I
> do not anticipate any problems picking up from where I left off, at
> least from the perspective of recalling the HC11 instruction set and
> re-familiarizing myself with the various HC11 subsystems. What I am
> looking for is advice from people here on where I can find
> (preferably freeware/shareware) up-to-date tools for HC11
> development - assemblers, compilers, debuggers, device programming
> tools, and the like.
>
> To get the topic started, and to partially answer my own question,
> I'll provide a few links here that have been provided recently on
> this list:
>
> Win32 debugger/monitor
> http://freespace.virgin.net/john.beatty/
> - good replacement for the obsolete PCBUG11
Excellent choice. Jbug11, by John Beatty, is a vey fine piece of work. The
old PCBUG11 is still in use some places (my sympathy to the users) but has
pretty much died of old age and lack of love (by Moto).
Be sure to join our Jbug11 email group at YaHoo. I be watching for your
subscription request.
>
> 68HC11 assembler (and a few other useful tools):
> http://www.aspisys.com
I use Tony's HC8 assember. _EXCELLENT_ bit of work.
> Tony Papadimitrou's HC11 assembler. It's
DOS based, but runs
> well in a Windows DOS box, and is considerably less 'quirky'
than
> the Motorola AS11 assembler.
Hopefully AS11 will also die of neglect.
>
>
> I would welcome any additions to the above list.
>
> p.s. I recall reading a posting here a few messages back that
> implied that the classic "Pink Book(s)" (HC11 reference
manuals)
> have been superseded by more up-to-date "White Book(s)". Is
this
> true?
Sure is. The old Rev 3 "Pink Book" has been replaced by Moto P/N
M68HC11RM/D, Rev 6, 4/2002. The general structure is the same but it has
expanded considerably and the Section numbers are badly skewed in many of
the sections. You can still get single bound copies at the Moto Document
Center.
Speaking of Moto, take some time to flounder around the "new and
improved"
moto MCU web site. I does have many improvements but is a real frustration
to those of us that had finally found our way around the quirks of the old
web site.
Good luck and looking forward to hearing more from you.
Bob Smith
>
> --
------
> Yahoo! Groups Links
>
> a.. To
|