On Tue, 11 May 2004 10:23:56 -0600, John Doty
<jpd@whispertel.LoseTheH.net> wrote:
>Might be very interesting to me if its physical interfaces can be
>adapted to what I'm doing. However, the link to the schematic (which I
>suppose would tell me what I want to know) gives me a "Not Found".
Fixed.
Stephen
--
Stephen Pelc, stephenXXX@INVALID.mpeltd.demon.co.uk
MicroProcessor Engineering Ltd - More Real, Less Time
133 Hill Lane, Southampton SO15 5AF, England
tel: +44 (0)23 8063 1441, fax: +44 (0)23 8033 9691
web: http://www.mpeltd.demon.co.uk - free VFX Forth downloads
Reply by Stephen Pelc●May 11, 20042004-05-11
On Tue, 11 May 2004 12:02:32 -0400, rickman <spamgoeshere4@yahoo.com>
wrote:
>I seem to recall suggesting to you that you should consider selling a
>low cost ARM dev kit and you told me it was not practical, that it would
>be next to giving it away. I would say $300 for a board and development
>software is a lot cheaper than your standard package. What prompted the
>change of mind?
Two things:
1) We changed the hardware supply system and our boards are now
made offshore - in the USA!
2) People using ARMs tend to write *much* larger applications,
just because they can, and so the 120k byte user code restriction
given by the LPC parts, combined with the 64k SRAM, made the
combination viable.
We await your order eagerly :-)
Regards, Stephen
--
Stephen Pelc, stephenXXX@INVALID.mpeltd.demon.co.uk
MicroProcessor Engineering Ltd - More Real, Less Time
133 Hill Lane, Southampton SO15 5AF, England
tel: +44 (0)23 8063 1441, fax: +44 (0)23 8033 9691
web: http://www.mpeltd.demon.co.uk - free VFX Forth downloads
Reply by arm developer●May 11, 20042004-05-11
NEW ARM board design with PHILIP LPC 2106 with JTAG
http://arm.web7days.com
US $65 + shipping
ready for shipping
Reply by John Doty●May 11, 20042004-05-11
Stephen Pelc wrote:
> Now availale from MPE is the C and Forth programmable
> ARM USB Stamp. 60MHz ARM, 128k Flash, 64k SRAM, USB,
> user programmable CPLD.
> http://www.mpeltd.demon.co.uk/usbstamp.htm
Might be very interesting to me if its physical interfaces can be
adapted to what I'm doing. However, the link to the schematic (which I
suppose would tell me what I want to know) gives me a "Not Found".
-jpd
I seem to recall suggesting to you that you should consider selling a
low cost ARM dev kit and you told me it was not practical, that it would
be next to giving it away. I would say $300 for a board and development
software is a lot cheaper than your standard package. What prompted the
change of mind?
--
Rick "rickman" Collins
rick.collins@XYarius.com
Ignore the reply address. To email me use the above address with the XY
removed.
Arius - A Signal Processing Solutions Company
Specializing in DSP and FPGA design URL http://www.arius.com
4 King Ave 301-682-7772 Voice
Frederick, MD 21701-3110 301-682-7666 FAX
Reply by Stephen Pelc●May 11, 20042004-05-11
Now availale from MPE is the C and Forth programmable
ARM USB Stamp. 60MHz ARM, 128k Flash, 64k SRAM, USB,
user programmable CPLD.
http://www.mpeltd.demon.co.uk/usbstamp.htm
Also the TiniARM module
http://www.mpeltd.demon.co.uk/tiniarm.htm
Stephen
--
Stephen Pelc, stephenXXX@INVALID.mpeltd.demon.co.uk
MicroProcessor Engineering Ltd - More Real, Less Time
133 Hill Lane, Southampton SO15 5AF, England
tel: +44 (0)23 8063 1441, fax: +44 (0)23 8033 9691
web: http://www.mpeltd.demon.co.uk - free VFX Forth downloads