Reply by Robert Adsett March 18, 20062006-03-18
At 10:47 PM 3/17/06 -0800, Stanley Frederickson wrote:
>If you are using GCC, you might want to check out
the
>following message from Karl Olsen back in December:
>http://groups.yahoo.com/group/lpc2000/message/11515
>
>
>--- Mukund Deshmukh <betacomp_ngp@beta...>
>wrote:
> > How to protect the code in LPC213X?
> >
> > The user manual has a very brief description.
> >
> > Any example in 'C' would be of great help.

There is also an alpha version of lpc2isp that may support this on download 
by adding an additional file that sets the protection word.

Robert
	

An Engineer's Guide to the LPC2100 Series

Reply by Stanley Frederickson March 18, 20062006-03-18
If you are using GCC, you might want to check out the
following message from Karl Olsen back in December:
http://groups.yahoo.com/group/lpc2000/message/11515
	--- Mukund Deshmukh <betacomp_ngp@beta...>
wrote:
> How to protect the code in LPC213X?
> 
> The user manual has a very brief description.
> 
> Any example in 'C' would be of great help.
	__________________________________________________
 

Reply by Mukund Deshmukh March 18, 20062006-03-18
Hi,
How to protect the code in LPC213X?

The user manual has a very brief description.

Any example in 'C' would be of great help.
	Best Regards,

Mukund Deshmukh.
Beta Computronics Pvt Ltd
10/1, IT Park, Parsodi,
Nagpur-440022
Cell - 9422113746