If you're using the Olimex wiggler and have trouble, there's an
earlier post on how to configure it.
Karim
-----Original Message-----
From: l... [mailto:l...]On Behalf
Of pberna2003
Sent: Monday, April 10, 2006 4:49 AM
To: l...
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator
--- In l..., "Leon Heller"
wrote: >
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now it > > recognized the new driver but it sends the error
message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with the > > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://webspace.webring.com/people/jl/leon_heller/
> Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
----- Original Message -----
From: "pberna2003"
To:
Sent: Monday, April 10, 2006 10:48 AM
Subject: [lpc2000] Re: IAR and Wiggler JTAG emulator > --- In l..., "Leon Heller"
> wrote:
>>
>> ----- Original Message -----
>> From: "pberna2003"
>> To:
>> Sent: Thursday, April 06, 2006 2:10 PM
>> Subject: [lpc2000] IAR and Wiggler JTAG emulator
>> > Dear all
>> >
>> > I'm training to use IAR V4.31A for ARM with wiggler. After
>> > downloading and installing the MAC_MOT.SYS driver (I got it from
>> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>> >
>> > I installed the driver. Then I have started the IAR C-SPY. Now
> it
>> > recognized the new driver but it sends the error message OCDemon
>> > Error, Internal error 43, and the debugging process doesn't start
>> >
>> > For your info, if I try to use the same Wiggler emulator with
> the
>> > Rowley IDE, all work properly.
>> >
>> > 1) Any idea about the reason of this error using IAR ?
>> > 2) Do anyone know if IAR really support Wiggler ?
>>
>> Are you using a genuine Wiggler or a clone?
>>
>> Leon
>> --
>> Leon Heller, G1HSM
>> leon.heller@...
>> http://webspace.webring.com/people/jl/leon_heller/
>>
> Dear Leon
>
> I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
> emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
> problem. I try also to connect pin 8 to pin 15 of the parallel port
> without any success. It seams the OCD commander doesn't recognize
> the dongle.
>
> Thank you in advance for any additional idea
Sorry, I can't think of anything. My home-made JTAG works OK with OCD
Commander and CrossWorks. Contact IAR and see what they say.
Leon
Reply by pberna2003●April 10, 20062006-04-10
--- In l..., "Leon Heller"
wrote: >
> ----- Original Message -----
> From: "pberna2003"
> To:
> Sent: Thursday, April 06, 2006 2:10 PM
> Subject: [lpc2000] IAR and Wiggler JTAG emulator
> > Dear all
> >
> > I'm training to use IAR V4.31A for ARM with wiggler. After
> > downloading and installing the MAC_MOT.SYS driver (I got it from
> > Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
> >
> > I installed the driver. Then I have started the IAR C-SPY. Now it > > recognized the new driver but it sends the error
message OCDemon
> > Error, Internal error 43, and the debugging process doesn't start
> >
> > For your info, if I try to use the same Wiggler emulator with the > > Rowley IDE, all work properly.
> >
> > 1) Any idea about the reason of this error using IAR ?
> > 2) Do anyone know if IAR really support Wiggler ?
>
> Are you using a genuine Wiggler or a clone?
>
> Leon
> --
> Leon Heller, G1HSM
> leon.heller@...
> http://webspace.webring.com/people/jl/leon_heller/
> Dear Leon
I'm using the Hitex Hitop-link ARM. It is regognized as wiggler
emulator by Rowley Crosswork and by HI-JTAG V0.2 too without any
problem. I try also to connect pin 8 to pin 15 of the parallel port
without any success. It seams the OCD commander doesn't recognize
the dongle.
Thank you in advance for any additional idea
Reply by Leon Heller●April 6, 20062006-04-06
----- Original Message -----
From: "pberna2003"
To:
Sent: Thursday, April 06, 2006 2:10 PM
Subject: [lpc2000] IAR and Wiggler JTAG emulator > Dear all
>
> I'm training to use IAR V4.31A for ARM with wiggler. After
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
>
> For your info, if I try to use the same Wiggler emulator with the
> Rowley IDE, all work properly.
>
> 1) Any idea about the reason of this error using IAR ?
> 2) Do anyone know if IAR really support Wiggler ?
Reply by haare_in_der_dusche●April 6, 20062006-04-06
> I'm training to use IAR V4.31A for ARM with
wiggler. After
> downloading and installing the MAC_MOT.SYS driver (I got it from
> Macraigor at http://www.macraigor.com/downloads/ocd_dbgr.exe)
>
> I installed the driver. Then I have started the IAR C-SPY. Now it
> recognized the new driver but it sends the error message OCDemon
> Error, Internal error 43, and the debugging process doesn't start
This might be caused by a missing connection inside your "wiggler"
clone. Connect pins 8 and 15, then error 43 should go away.
But that's not everything.
Ocdemon seems to be a heap of crap when used on a serious windows
system. It's close to dysfunctional and throws error message after error
message. And it's way slow. Real slow.
Maybe it works better on a pseudo windows system (95/98/me that is).
> For your info, if I try to use the same Wiggler
emulator with the
> Rowley IDE, all work properly.
That is at least ONE reason to stay with Rowley,
> 1) Any idea about the reason of this error using IAR
?
That's not an IAR related problem, but a problem related to
Macraigor's
ineptness at creating working software.
> 2) Do anyone know if IAR really support Wiggler ?
see above.
___________________________________________________________
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
I installed the driver. Then I have started the IAR C-SPY. Now it
recognized the new driver but it sends the error message OCDemon
Error, Internal error 43, and the debugging process doesn't start
For your info, if I try to use the same Wiggler emulator with the
Rowley IDE, all work properly.
1) Any idea about the reason of this error using IAR ?
2) Do anyone know if IAR really support Wiggler ?
