Thank you Alban,
I will take a look at the Freescale forum.
I do have an old Paralell Port BDM Multilink that I normally use with
this CW V1.2 system, I was just wondering (as some new notebooks don't
have a LPT) if I can use the USB BDM that I've recently bought from P&E
for HCS12/HCS08 programming.
I also had to buy again the PROG12Z that I use for production, my
PROG12Z version 1.6 didn't work with the new USB Multilink Rev C. , I
thought that from V1.6 to V1.7 was a minor upgrade but...

Best regards,
G.Molina.

Alban wrote:
>
> --- In 6...

&E

--- In 6..., "Guillermo F. Molina" wrote:
>
> Hi all,
>
> Did anyone know if it is any chance to use the Hiwave debugger of the
> (old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?
>
> Thanks in advance.
> Best regards,
>
> G.Molina
>

Hello,

>From what I read in Freescale Forum (http://forums.freescale.com/),
this is not possible because of drivers.
If you want to debug only, you can use the new CodeWarrior for free.
IT just has a limitation on the size of code. And you can get a
software from P&E Micro to program without limitation (something like
PROG08): http://pemicro.com

Regards,
Alban.

Hi all,

Did anyone know if it is any chance to use the Hiwave debugger of the
(old!) Codewarrior V1.2 with the new USB Multilink (ML-12 Rev. C )?

Thanks in advance.
Best regards,

G.Molina