--- In , "Don Kinzer" <dkinzer@e...> wrote:
> --- In , "gpsrunner2000"
<hans.selin@g...>
> wrote:
> > Try to connect LCD KS0713 controller in serial mode to my BASICX-
24.
> > (I use SID, RS, SCLK without any Pull Up
resistors)
>
> You didn't mention the other inputs such as CS2, CS1B, RS, E_RD,
> RW_WR, PS and MI. Do you have them connected properly for serial
> input?
>
> I referred to the documentation at http://www.lcd-
> module.de/eng/pdf/zubehoer/ks0713.pdf. Is that what you have?
Yes, almost, i have KS0713B-H0CC:
(www.sytco.com.tw/pdf_1/data/cog/g102064-10-3.pdf)
And i have connected the following:
- VDD to 3.0 Volt
- VSS to ground
- SID to BASICX-24 pin
- SCLK to BASICX-24 pin
- RS to BASICX-24 pin, High =Display Data, Low = controll Data
- /RESET to BASICX-24 pin for module reset
- /CS1B to BASICX-24 pin for module active or inactive
Thats all, doesn't have any more connectors such as RW_WR, PS, MI,
E,RD or CS2.
I played with the PUTPIN, PULSOUT and Jon W's LCDPutLCD but NO
data at all.
/Hans
|