>
> First of all thank you for your hint.
> I already know about this tool, but it still depends on the CygWin
> environment.
> Is there any other tool not needing this framework ?
>
> Gregor
>
--- In l..., "gcopoix" wrote: >
> > > is there a flashtool to program an LPC214x by Wiggler JTAG clone ?
> > > It just needs to program the device, debugging is not relevant.
> > > Best would be just a simple exe accessing the parallel port for
> > > wiggler, it shouldn't need much installation/configuration.
>
> > I am using openOCD from Dominic Rath.
> > http://openocd.berlios.de/web/
> > Tutorial and compiled version:
> > http://www.usbdip.de/en/armdev/index.html
>
> First of all thank you for your hint.
> I already know about this tool, but it still depends on the CygWin
> environment.
> Is there any other tool not needing this framework ?
>
> Gregor
> Twentyone, the developer of H-JTAG has one in development, but the
last time that I checked his web site it was not ready yet. His H-JTAG
tool is a stand alone RDI debugger interface to Wiggler, so I would
expect the FLASH programmer tool to work in a similar manner. http://hjtag.blogspot.com/
--Dave
Reply by gcopoix●May 18, 20062006-05-18
> > is there a flashtool to program an LPC214x by
Wiggler JTAG clone ?
> > It just needs to program the device, debugging is not relevant.
> > Best would be just a simple exe accessing the parallel port for
> > wiggler, it shouldn't need much installation/configuration.
First of all thank you for your hint.
I already know about this tool, but it still depends on the CygWin
environment.
Is there any other tool not needing this framework ?
--- In l..., "gcopoix" wrote: >
> Hello,
>
> is there a flashtool to program an LPC214x by Wiggler JTAG clone ?
> It just needs to program the device, debugging is not relevant.
> Best would be just a simple exe accessing the parallel port for
> wiggler, it shouldn't need much installation/configuration.
>
>
> Thank you for your hints.
>
> Gregor
>
Reply by gcopoix●May 16, 20062006-05-16
Hello,
is there a flashtool to program an LPC214x by Wiggler JTAG clone ?
It just needs to program the device, debugging is not relevant.
Best would be just a simple exe accessing the parallel port for
wiggler, it shouldn't need much installation/configuration.
Thank you for your hints.