You are right Uwe. I missed it. It was right under my nose ;)
Thank you,
Bob Davis
--- In , "Uwe Arends" <Uwe_Arends@o...> wrote: > Bob,
>
> take a look at the User Manual, p.89. Not too bad an explanation. ;- ) >
> -uwe
>
> ----- Original Message -----
> From: "Robert Davis" <rdavis@I...>
> To: <>
> Sent: Tuesday, April 06, 2004 5:43 PM
> Subject: [lpc2000] What is the UART CTI Interrupt?
> > Hi,
> >
> > I am working with the UART1 of the LPC2106 using the UARTecho sample program with the KickStart board from IAR. The UART keeps > generating the character time-out indicator
interrupt. I have looked through all of the documentation from Philips and I cannot > find an explanation of what actually causes this
interrupt. Does it mean that a stop bit was not found in nine bit times from the > start bit? Does it mean that the receive FIFO
overran? Is this lack of a clear and concise explanation indicative of Philips > documentation? I am new to the LPC210x family, so
please excuse my lack of understanding if the answer is obvious. I have worked > mostly with Motorola micros and there
documentation seems more concise. > >
> > Thanks,
> > Bob Davis
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
take a look at the User Manual, p.89. Not too bad an explanation. ;-)
-uwe
----- Original Message -----
From: "Robert Davis" <>
To: <>
Sent: Tuesday, April 06, 2004 5:43 PM
Subject: [lpc2000] What is the UART CTI Interrupt?
> Hi,
>
> I am working with the UART1 of the LPC2106 using the UARTecho sample
program with the KickStart board from IAR. The UART keeps generating the character time-out indicator interrupt. I have looked
through all of the documentation from Philips and I cannot
find an explanation of what actually causes this interrupt. Does it mean that a
stop bit was not found in nine bit times from the
start bit? Does it mean that the receive FIFO overran? Is this lack of a clear
and concise explanation indicative of Philips
documentation? I am new to the LPC210x family, so please excuse my lack of
understanding if the answer is obvious. I have worked
mostly with Motorola micros and there documentation seems more concise. >
> Thanks,
> Bob Davis
>
>
> Yahoo! Groups Links
>
Reply by Robert Adsett●April 6, 20042004-04-06
At 11:43 AM 4/6/04 -0400, you wrote: >I am working with the UART1 of the LPC2106 using
the UARTecho sample
>program with the KickStart board from IAR. The UART keeps generating the
>character time-out indicator interrupt. I have looked through all of the
>documentation from Philips and I cannot find an explanation of what
>actually causes this interrupt. Does it mean that a stop bit was not found
>in nine bit times from the start bit? Does it mean that the receive FIFO
>overran? Is this lack of a clear and concise explanation indicative of
>Philips documentation? I am new to the LPC210x family, so please excuse my
>lack of understanding if the answer is obvious. I have worked mostly with
>Motorola micros and there documentation seems more concise.
The CTI essentially means that there are characters in the receive FIFO but
not enough to pass the threshold and there are no characters coming in.
Robert
" 'Freedom' has no meaning of itself. There are always
restrictions,
be they legal, genetic, or physical. If you don't believe me, try to
chew a radio signal. "
Kelvin Throop, III
Reply by Robert Davis●April 6, 20042004-04-06
Hi,
I am working with the UART1 of the LPC2106 using the UARTecho sample program
with the KickStart board from IAR. The UART keeps generating the character
time-out indicator interrupt. I have looked through all of the documentation
from Philips and I cannot find an explanation of what actually causes this
interrupt. Does it mean that a stop bit was not found in nine bit times from the
start bit? Does it mean that the receive FIFO overran? Is this lack of a clear
and concise explanation indicative of Philips documentation? I am new to the
LPC210x family, so please excuse my lack of understanding if the answer is
obvious. I have worked mostly with Motorola micros and there documentation seems
more concise.