>I've developed a product on basis of PIC16F442. On some conditions my
>unit goes to the SLEEP mode and wake up from the SLEEP on WDT time-out
>or on an interrupt. The postscaler,I've taken, is 64, giving us 64 *
>18msec = 1.152sec.
>I tested it with MPLAB ICE-2000 and found everything is OK. But then I
>burned the real chip(I have only PIC16F452) and found that the WDT
>time-out is 18mses instead of 1sec as desired, meaning the postscaler
>does not work. I don't know how to eat it.
>I will be very grateful for any idea or suggestion.

I assume you mean PIC18F442/452. You should make sure the configuration bits
are set using assembler directives in your source code. I believe these
override the configuration bits settings of the MPLAB IDE.

Dear Sirs,

I've developed a product on basis of PIC16F442. On some conditions my
unit goes to the SLEEP mode and wake up from the SLEEP on WDT time-out
or on an interrupt. The postscaler,I've taken, is 64, giving us 64 *
18msec = 1.152sec.
I tested it with MPLAB ICE-2000 and found everything is OK. But then I
burned the real chip(I have only PIC16F452) and found that the WDT
time-out is 18mses instead of 1sec as desired, meaning the postscaler
does not work. I don't know how to eat it.
I will be very grateful for any idea or suggestion.

Thank you in advance and best regards.