On Friday, October 25, 2013 5:05:17 AM UTC-7, dp wrote:
> On Friday, October 25, 2013 10:40:41 AM UTC+3, Paul Rubin wrote:
>
> > Bool <nospam@nospam.com> writes:
> >
> > I'm looking for a low cost solution to connect a TFT LCD at least 7"
> > > to the microcontroller by UART/SPI/I2C. I have to show only static
> > > graphic with touch operations.
> > FTDI -> USB -> cheap android tablet. I've heard of software bit banged
> > VGA but really, that's sick.
>
> Nothing sick about bit banging it - if you can. But it is far from
> being practical.
At the risk of being called the spelling police, i think he meant slick. ;-)
Reply by hamilton●October 25, 20132013-10-25
On 10/25/2013 1:11 AM, Bool wrote:
> I'm looking for a low cost solution to connect a TFT LCD at least 7" to
> the microcontroller by UART/SPI/I2C. I have to show only static graphic
> with touch operations. FT800 chip looks nice, but unfortunately it only
> supports a resolution up to 512x512, and 7" TFT has 800x480.
On Friday, October 25, 2013 10:40:41 AM UTC+3, Paul Rubin wrote:
> Bool <nospam@nospam.com> writes:
> > I'm looking for a low cost solution to connect a TFT LCD at least 7"
> > to the microcontroller by UART/SPI/I2C. I have to show only static
> > graphic with touch operations.
>
> FTDI -> USB -> cheap android tablet. I've heard of software bit banged
> VGA but really, that's sick.
Nothing sick about bit banging it - if you can. But it is far from
being practical.
The tablet solution is not exactly a "display", boots for ages etc.
Not that I do not do it, only I use VNC (RFB) over the net, at 100MbpS
works great (have used it at up to 1280x1024, 1920 x 1080 should still
work fine).
Dimiter
------------------------------------------------------
Dimiter Popoff, TGI http://www.tgi-sci.com
------------------------------------------------------
http://www.flickr.com/photos/didi_tgi/sets/72157600228621276/
Reply by Paul Rubin●October 25, 20132013-10-25
Bool <nospam@nospam.com> writes:
> I'm looking for a low cost solution to connect a TFT LCD at least 7"
> to the microcontroller by UART/SPI/I2C. I have to show only static
> graphic with touch operations.
FTDI -> USB -> cheap android tablet. I've heard of software bit banged
VGA but really, that's sick.
Reply by dp●October 25, 20132013-10-25
On Friday, October 25, 2013 10:11:48 AM UTC+3, Bool wrote:
> I'm looking for a low cost solution to connect a TFT LCD at least 7" to
> the microcontroller by
>
> UART/SPI/I2C. I have to show only static graphic with touch operations.
> FT800 chip looks nice, but
>
> unfortunately it only supports a resolution up to 512x512,
> and 7" TFT has 800x480.
Since Intel bought & destroyed Chips & tech there is no such
chip on the market (they had the b69000 and the b69030).
Silicon motion, a Taiwanese firm, have some similar parts
on their website but I think they are hybrids and they
are not available through the major distributor channels
(I have never tried them out).
Dimiter
------------------------------------------------------
Dimiter Popoff, TGI http://www.tgi-sci.com
------------------------------------------------------
http://www.flickr.com/photos/didi_tgi/sets/72157600228621276/
Reply by Bool●October 25, 20132013-10-25
I'm looking for a low cost solution to connect a TFT LCD at least 7" to the microcontroller by
UART/SPI/I2C. I have to show only static graphic with touch operations. FT800 chip looks nice, but
unfortunately it only supports a resolution up to 512x512, and 7" TFT has 800x480.