Posted by ronald david alberto morante February 9, 2005
LOS ASUNTOS QUE QUIERAN MANDARME HAGANLO EN ESPAL yirga10 <> wrote:
THANKS FOR READING AND ANY HELP YOU CAN GIVE.

I AM RUNING TWO SERVOS THROUGH AND OPTIC ISOLATOR. THE POTS HAVE
BEEN NULLED OUT AT 1.5ms AND ACT PROPERLY WHEN ONLY ONE IS RUNNING
THAT IS IT DOESN'T MOVE...BUT WHEN BOTH MOTORS ARE PLUGGED IN THEY
BOTH RUN FAST AT THE 1.5ms pulsewidth, WHICH THEY SHOULDNT SINCE
THEY HAVE BEEN NULLED OUT? (BOTH SERVOS ARE RUNNING FROM DIFFERENT
OUTPUT PINS) ANY HELP WITH THIS PROBLEM WOULD BE GREATLY APPRECIATED.

---------------------------------
Yahoo! Groups Links

To

---------------------------------


Posted by yirga10 February 5, 2005

THANKS FOR READING AND ANY HELP YOU CAN GIVE.

I AM RUNING TWO SERVOS THROUGH AND OPTIC ISOLATOR. THE POTS HAVE
BEEN NULLED OUT AT 1.5ms AND ACT PROPERLY WHEN ONLY ONE IS RUNNING
THAT IS IT DOESN'T MOVE...BUT WHEN BOTH MOTORS ARE PLUGGED IN THEY
BOTH RUN FAST AT THE 1.5ms pulsewidth, WHICH THEY SHOULDNT SINCE
THEY HAVE BEEN NULLED OUT? (BOTH SERVOS ARE RUNNING FROM DIFFERENT
OUTPUT PINS) ANY HELP WITH THIS PROBLEM WOULD BE GREATLY APPRECIATED.