====================================================================
I'm interested too with this kind of fowarding. I have to connect a
rabbit thru ppp and use it as a gateway . So if someone find somthing
i'll be interested.
thanx
Jonathan
===================================================================
--- In rabbit-semi@rabb..., "Peter" <aapeterm@y...> wrote:
> I am looking to do a fairly simple implementation
- no RIP or ICMP -
> just forwarding of IP packets using static route tables.
>
> Peter
> --- In rabbit-semi@rabb..., "Dave Moore" <dmoore@q...>
wrote:
> > It's been talked about a couple of times
in this forum. I've
> looked at it
> > also, but only from the point of view of the rabbit as having the
> > destination address on a different interface (not a real router.)
> That was
> > a pretty simple hack inside the appropriate lib (I think I just
> needed UDP).
> > A real router needs a whole bunch of other stuff I didn't need to
> realize.
> > Dunno if rabbit is thinking about it.
> >
> > -----Original Message-----
> > From: Peter [mailto:aapeterm@y...]
> > Sent: Tuesday, December 30, 2003 10:57 AM
> > To: rabbit-semi@rabb...
> > Subject: [rabbit-semi] IP Forwarding/Routing between Ethernet and
> serial PPP
> > on RCM3000
> >
> >
> > Has anyone attempted or been successful in adding IP routing
> > functionality to the IP libraries on the rabbit? I want to be
able
> > to route packets back and forth between a
serial PPP interface and
> > the Ethernet interface on an RCM3000.
> >
> > It seems that it would require some tweaking to the IP.LIB and
> > possibly some of the other libraries to implement this
> functionality.
> >
> > Anyone know if rabbit has this planned for future released of DC?
> >
> > Thanks in advance!
> >
> > Peter
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > rabbit-semi-unsubscribe@rabb...
> >
> >
> >
> >
> >
> > _____
> >
> > > .