Posted by jadamezmartin July 27, 2006
Thanks Richard. I will have a loook to the website!!

JeSuS

--- In l..., "R. Wimmer" wrote:
> That shouldn't be much of a problem, depending on the sound
quality.
> Have a look at http://www.k9spud.com he did it on a LPC2103.
> ..richard
>
> --- In l..., "jadamezmartin" wrote:
> >
> > Hello All,
> >
> > I am working with the microcontroller (Philips LPC2124) and I
need
> > to use the A/D and the PWM to generate audio. I mean, the audio
> > signal is going to be the input of the A/D and then I have to
> > "rebuild" it using PWM.
> >
> > Has anyone done it? Is there something "special" to be
considered?
> >
> > Thanks in advance.
> >
> > Jesus
>

An Engineer's Guide to the LPC2100 Series

Posted by "R. Wimmer" July 26, 2006
That shouldn't be much of a problem, depending on the sound quality.
Have a look at http://www.k9spud.com he did it on a LPC2103.
..richard

--- In l..., "jadamezmartin" wrote:
>
> Hello All,
>
> I am working with the microcontroller (Philips LPC2124) and I need
> to use the A/D and the PWM to generate audio. I mean, the audio
> signal is going to be the input of the A/D and then I have to
> "rebuild" it using PWM.
>
> Has anyone done it? Is there something "special" to be considered?
>
> Thanks in advance.
>
> Jesus
>
Posted by jadamezmartin July 26, 2006
Hello All,

I am working with the microcontroller (Philips LPC2124) and I need
to use the A/D and the PWM to generate audio. I mean, the audio
signal is going to be the input of the A/D and then I have to
"rebuild" it using PWM.

Has anyone done it? Is there something "special" to be considered?

Thanks in advance.

Jesus