Reply by Rene Tschaggelar February 19, 20042004-02-19
Massimo Dazzan wrote:

> Hi all... > > I have an application that runs on a PC104 in a RTOS enviroment ( On-time > RTOS-32). > Now i need to control a dot printer (EPSON LQ300+); to make it i need to > write a low level driver to manage LPT port signals. > I have no experience in it... > ....please help me....
There is a printer manual explaining all the codes to be sent to the printer. If you don't have it, get it from the manufacturer. Then just implement them. It boils down to writing some data to some peripheral port. Rene -- Ing.Buero R.Tschaggelar - http://www.ibrtses.com & commercial newsgroups - http://www.talkto.net
Reply by Massimo Dazzan February 19, 20042004-02-19
Hi all...

I have an application that runs on a PC104 in a RTOS enviroment ( On-time
RTOS-32).
Now i need to control a dot printer (EPSON LQ300+); to make it i need to
write a low level driver to manage LPT port signals.
I have no experience in it...
....please help me....

Thank's in advance

Massimo