>
> F.Y.I
>
> Excuse me for my little knowledge in pc104.
>
> What is the easiest way to communicate between a pc104 and a ordinary
> pc, is it possible by pci slot ?
> In order to do that do I need the pc104+ ?
You can plug a PC104 card into an ISA bus connector by using an adaptor
board. But you may have a problem finding a PC with an ISA bus
connector these days. They still exist, but have gotten rather pricey.
You can do the same thing with a PC/104+ board, plugging it into a PCI
slot using an adaptor card. But I have not seen many of these. It is
very hard to make an adaptor card that meets the PCI spec, in fact, I
don't think it is actually possible unless a bridge chip is used. But
look around, I bet they are available somewhere.
--
Rick "rickman" Collins
rick.collins@XYarius.com
Ignore the reply address. To email me use the above address with the XY
removed.
Arius - A Signal Processing Solutions Company
Specializing in DSP and FPGA design URL http://www.arius.com
4 King Ave 301-682-7772 Voice
Frederick, MD 21701-3110 301-682-7666 FAX
Reply by adi●February 19, 20042004-02-19
F.Y.I
Excuse me for my little knowledge in pc104.
What is the easiest way to communicate between a pc104 and a ordinary
pc, is it possible by pci slot ?
In order to do that do I need the pc104+ ?
thanks