Hello,
I work on an MSP430F2254 with a MSP-FETFlash Emulation Tool.
My code UART don't work in run but in free run.
MSP430F22x4 Demo - USCI_A0, Ultra-Low Pwr UART 9600 String, 32kHz
ACLK
Description: This program demonstrates a full-duplex 9600-baud UART
using
USCI_A0 and a 32kHz crystal. The program will wait in LPM3, and will
respond to a received 'u' character using 8N1 protocol. The response
will
be the integer value.
ACLK = BRCLK = LFXT1 = 32768Hz, MCLK = SMCLK = DCO ~1.2MHz
Baud rate divider with 32768Hz XTAL @9600 = 32768Hz/9600 = 3.41
* An external watch crystal is required on XIN XOUT for ACLK *
Have you got an idea at my problem ?
Thank you for your help
Jo
---------------------------------------
Posted through http://www.EmbeddedRelated.com