Hi Rick
My personal e-mail address is vnick76@hotmail.com
I hope admin will not restict my e-mail address. Sent before on forum my
business e-mail address if someone was interested in a collaboration for
support me with codewrite but e-mail address was restricted.
If posting e-mail address is against forum policy, maybe admin will send only
to you.
Once again, thank you so much.
Regards
Nick
>
> On 10/7/2015 9:37 PM, Nick wrote:
> > responding to
> > http://www.electrondepot.com/embedded/codewright-error-124860-.htm
> , Nick
> > wrote:
> >
> > Hi Rick
> > Since your last e-mail, here was some more coments and opinion
> >
> > As today is Wednesday, I was want to remeber your by CW software.
> >
> > Please let me know if your help is still available and how I go get
> it.
> >
> > Tahnk you again all
> > Regards
> > Nick
> >
> >> gnuarm wrote:
> >>
> >> On 10/1/2015 9:37 PM, Nick wrote: > responding to >
> >>
> http://www.electrondepot.com/embedded/codewright-error-124860-.htm
> >> , Nick > wrote: >> david.brown wrote: >>
> >> >> > > Hi. I have
> >> searched over the internet about
> >> Codewright 5.1 and i >> found > on this > forum
> some old topics. I
> >> need to buy
> >> Codewright 5.1 >> and i see this >> is > not
> valid anymore because is
> >> an > very old. > Can
> >> anyone help me >> PLEASE with a demo evaluation copy ?!
> > Thank you so
> >> much
> >> > Nick > > >> I have to ask - /why/ are you
> desperate to get hold of an
> >> outdated >> version of an outdated editor? There was a
> time when
> >> CodeWrite
> >> was a >> top-range programmer's editor, and worth paying
> for - but these
> >> days >> there is a wide range of free editors, many with
> far more
> >> features >> than CodeWrite ever had (and others that are
> lighter and
> >> faster
> >> - not >> everyone wants a big and powerful editor). I
> can understand
> >> that >> someone who has been using CodeWrite for years
> would want to
> >> keep >> using it, but I cannot see why anyone would want
> it now. >> I
> >> have a manual for CodeWrite 5 on my shelf, from 1997. It
> >> sits >> beside some LANtastic for DOS guides, right next
> to an 8"
> >> floppy disk. >> > > > Hi all > Thank you so
> much for your fast answer.
> >> > I need this OLD version (v5.1) because i need to reprogram
> some OLD
> >> building > management panels and i have support and manuals
> only for this
> >> version of > codewright. > As i am not an experimented
> developer i
> >> will have to follow
> >> instruction from > this manual to with this version. > If
> i will get
> >> another compiler, i will be probably COMPLETELY LOST.
> >> I am > anyway scared about this Codewright 5.1 > I was
> searched few
> >> days (one, tow hours each day) to find this
> >> version but it > is completely dispaerd. I tried as well on
> eBay and
> >> Amazon. > I found anyway, Codewright v7.5 but i understand
> this have
> >> some bit
> >> difference. > The problem is i have no space for mistakes
> because this
> >> system
> >> that i have to > reprogram, is functional, in a bulding and
> if i make
> >> something
> >> wrong, system > will not work any more. > Beside of the,
> programming
> >> of this must be made with Microsoft
> >> Macro Assembler > MASM v6.1, then compiled with Codewrite
> and finale,
> >> loaded in the
> >> master panel > via dedicated Winsweep serial communication
> software. >
> >> > Anyway, if is not a big deal for you, please help me with
> manual of
> >> this 5.1 > version, because, i did;t found manual over
> internet. >
> >> Anyway, i am an very ambitios guy and i will not stop searching
>
> >> until i will > not find a copy > > Thank you so much
> for all time
> >> spent with my problem
> >> When you reply, but sure you don't leave the "-- " on
> the line
> >> before your new writing. That flags it as a signature and
> makes it
> >> hard to
> >> read.
> >> If your development method is so constrained that you can't use
> a
> >> different editor, you may be in trouble. If you are not in a
> big hurry
> >> I will check my office when I get back next week and see if I
> have an
> >> old 5.1 CD around. I know I had a couple of versions and that
> may be
> >> one of them.
> >> I'm a little uncomfortable with the legality of this though.
> They are
> >> still selling Codewright, I think mainly to the mainframe code
> >> development market where it was a very popular tool along with
> PVCS and
> >> some other packages. The price is up there, over $300 I think.
> But
> >> shoot me an email Wednesday and I'll try to remember to dig it
> up.
> >> --
> >> Rick
> >
> >
> >
>
>
> --
>
> Rick
>