I should have mentioned RFU and the bin files are part of the Dynamic C
installation. If you have you original disk and/or installed on a machine,
you should already have the correct files.
>In order to program an RCM2020 (which I presume will be the same as the
>RCM2100) you need a program from Rabbit called RFU.exe along with
>"coldload.bin" and "pilot.bin". The problem is that these files are
In order to program an RCM2020 (which I presume will be the same as the
RCM2100) you need a program from Rabbit called RFU.exe along with
"coldload.bin" and "pilot.bin". The problem is that these files are
dependent on the version of Dynamic C that was used to create the program.
Past experience (several years ago now) with tech support at Digi (who
took over Rabbit) (www.digi.com) was very positive and they supplied all
the setup and files needed. I suggest you contact them.
For what it is worth though, there can be issues in using the USB/RS232
adaptor. I am not sure if it is PC/Windows version dependent or the
adaptor itself. To complicate the process, the setup within rfu allows for
the option to use a USB to serial converter or just serial.
Counter-intuitively it needs to be set to a regular serial connection. At
one point Rabbit was selling an adaptor cable that worked better than
others, but they no longer do that.
Good luck.
>Hi Group,
>
>I have an Rabbit Semi RCM2100 module.
>I have a serial programming cable, but I require a PC programming
utility
> in order to write / read program code to the RCM2100.
>
>Which program utils are available?
>
>Can you post web-links or my options?
>
>Thank you for your feedback.
>
>Gerhard
>
>
>
>---------------------------------------
>Posted through http://www.EmbeddedRelated.com
Hi Group,
I have an Rabbit Semi RCM2100 module.
I have a serial programming cable, but I require a PC programming utility
in order to write / read program code to the RCM2100.
Which program utils are available?
Can you post web-links or my options?
Thank you for your feedback.
Gerhard
---------------------------------------
Posted through http://www.EmbeddedRelated.com