Some people in the group kindly responded and I have already sent it to one
of them. Thank you all who tried to help.
vax3900
vax,3900 wrote:
> Need to read out the content of a GAL20V8. It does not use any FF's. It
> contains pure combination logic. I know a bunch of LED's and some jumpers
> can do the job, but I am out of resources and this simple goal will cost
> me a lot of time. Could somebody in the group generously help me to
> measure it? If you have a proper device this will be fairly easy. I can
> pay shipping both way. Thank you.
>
> vax3900
Reply by Lewin A.R.W. Edwards●February 6, 20042004-02-06
> contains pure combination logic. I know a bunch of LED's and some jumpers
> can do the job, but I am out of resources and this simple goal will cost me
In fact, a bunch of LEDs and a counter IC would give you the same
results with less jumper-wiggling. I'm in NY, and my device programmer
supports GALs, I can _try_ putting it in (as long as it is DIP package)
and see what happens if I select readback. But no guarantees that the
device will survive!
Email me if you want to try.
Reply by ●February 6, 20042004-02-06
Paul Burke wrote:
> vax,3900 wrote:
>> Need to read out the content of a GAL20V8. It does not use any FF's. It
>> contains pure combination logic. I know a bunch of LED's and some jumpers
>> can do the job, but I am out of resources and this simple goal will cost
>> me a lot of time. Could somebody in the group generously help me to
>> measure it? If you have a proper device this will be fairly easy. I can
>> pay shipping both way. Thank you.
>
> If you are in the UK, I might be able to do it, assuming it's not
> protected of course...
>
> Paul Burke
Too bad that I am in OHIO, USA.
Reply by Paul Burke●February 6, 20042004-02-06
vax,3900 wrote:
> Need to read out the content of a GAL20V8. It does not use any FF's. It
> contains pure combination logic. I know a bunch of LED's and some jumpers
> can do the job, but I am out of resources and this simple goal will cost me
> a lot of time. Could somebody in the group generously help me to measure
> it? If you have a proper device this will be fairly easy. I can pay
> shipping both way. Thank you.
If you are in the UK, I might be able to do it, assuming it's not
protected of course...
Paul Burke
Reply by ●February 6, 20042004-02-06
Need to read out the content of a GAL20V8. It does not use any FF's. It
contains pure combination logic. I know a bunch of LED's and some jumpers
can do the job, but I am out of resources and this simple goal will cost me
a lot of time. Could somebody in the group generously help me to measure
it? If you have a proper device this will be fairly easy. I can pay
shipping both way. Thank you.
vax3900