> On Tue, 10 May 2016 11:29:01 +0200, pozz wrote:
>
> > http://imgur.com/KgrJwBD
> >
> > I'm quite sure it is an embedded Linux board. Do you know the
> > manufacturer?
I do like a Name That Ware challenge :)
> Whatever it is, it's red, and it's a view of the back side.
>
> IIRC, Olimex used that color of solder mask for a while -- look on their
> website?
>
> Did you blank off the bottom center, where one might expect a board
> name? Or was that someone else?
It's an Allwinner board - probably A10, A13 or A20. The giveaway was the
IPSOUT signal, which connects to the AXP209 power chip.
The BGA escapes and DRAM layout look similar to Olimex's A20 board:
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2/open-source-hardware
so I would guess it's a non-Olimex A20 board. From someone in the Chinese
A20 ecosystem?
Theo
Reply by Tim Wescott●May 10, 20162016-05-10
On Tue, 10 May 2016 11:29:01 +0200, pozz wrote:
> http://imgur.com/KgrJwBD
>
> I'm quite sure it is an embedded Linux board. Do you know the
> manufacturer?
Whatever it is, it's red, and it's a view of the back side.
IIRC, Olimex used that color of solder mask for a while -- look on their
website?
Did you blank off the bottom center, where one might expect a board
name? Or was that someone else?
--
Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
I'm looking for work -- see my website!
Reply by pozz●May 10, 20162016-05-10
http://imgur.com/KgrJwBD
I'm quite sure it is an embedded Linux board. Do you know the manufacturer?