Reply by longjeng October 24, 20062006-10-24
--- In b..., Tom Becker wrote:
>
> > ... Rotomotion AHPRS and I try to communicate ...
>
> I found this:
http://www.rotomotion.com/downloads/ahrs_2.4.005_notes.pdf
>
> It says 3800(!) baud, twice, and points to the Sourceforge Autopilot
> project for tech support. Good luck.
> Tom
>
Thanks Tom:
Yes I had found the page, but it left no much information how to
program or use command syntax via RS232 interface. We tried to use
basicx to test.
longjeng
Reply by Tom Becker October 21, 20062006-10-21
> ... Rotomotion AHPRS and I try to communicate ...

I found this: http://www.rotomotion.com/downloads/ahrs_2.4.005_notes.pdf

It says 3800(!) baud, twice, and points to the Sourceforge Autopilot
project for tech support. Good luck.
Tom
Reply by longjeng October 21, 20062006-10-21
Dear All:
Recently I bought the rotomotion AHPRS and I try to communicate via
RS232. But its document could not give me how to program. Does anybody
kinderly suggest the command syntax. Thank you very much.