Hi,

Yes, must of them today are surfaces mount. Few are dip type ic's.

I found another but is a module already made here is the link:

http://www.costcentral.com/proddetail/ATEN/IC485S/499069/
rosarite
-----Original Message-----
From: m...@gmail.com
To: b...
Sent: Tue, 27 Mar 2007 3:03 AM
Subject: Re: [BasicX] RS232<->RS584 converter

Hi,

that surface mount right?
I need chips that have Through-hole pins. Any of those?

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
>
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
>
>
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>

________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.

Hi,

that surface mount right?
I need chips that have Through-hole pins. Any of those?

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>

Hi
Thank you.

Fernando

On 3/26/07, r...@aol.com wrote:
>
> Hi,
>
> Attached is the link for Maxim :
> http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613
>
> Hope this is what your looking.
>
> Rosarite
>
> -----Original Message-----
> From: m...@gmail.com
> To: b...
> Sent: Mon, 26 Mar 2007 9:21 AM
> Subject: [BasicX] RS232<->RS584 converter
>
> hi, i want to connect a sensor that has an output in RS485. What is
> the Maxim part to convert that to RS232? Or other brand parts...
> thanks for your help
> __________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free
> from AOL at AOL.com.
>
>
>
>
>

Hi,

Attached is the link for Maxim :
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/4613

Hope this is what your looking.

Rosarite

-----Original Message-----
From: m...@gmail.com
To: b...
Sent: Mon, 26 Mar 2007 9:21 AM
Subject: [BasicX] RS232<->RS584 converter

hi, i want to connect a sensor that has an output in RS485. What is
the Maxim part to convert that to RS232? Or other brand parts...
thanks for your help

________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.

hi, i want to connect a sensor that has an output in RS485. What is
the Maxim part to convert that to RS232? Or other brand parts...
thanks for your help